https://cimg0.ibsrv.net/gimg/www.mia...ca3be45f20.jpg
https://cimg5.ibsrv.net/gimg/www.mia...f66f9d9e63.jpg
Yea I dont think I'll be able to tune it myself. I'll have to play the waiting game , periodically check online and see if a good deal pops up. I'm thinking I need the haltech 1000 ecu? If anyone wants to chime in, feel free. I'm gonna order a 125 mm 6 rib pulley. I checked previous injector threads, and I'm still confused. If anyone can just post a link to the best bang for buck injectors for 10-12 psi, would be appreciated. What else do I need to look into?

I have 550cc ev14 injectors in for last 4 years, no problems and ecu shows the % duty is below 60. So loads of headroom.

seriously consider a megasquirt so you can tune the car yourself. You can also log runs to see if your belt is slipping.

If your Haltech will drive low impedance, peak and hold injectors (some of them will, IIRC), then your best bang for the buck is to buy some old RC550s. No, they're not as fancy as the modern ev14s, but with low impedance drivers they idle fine and they're cheap. Megasquirts don't have low impedance drivers, so nobody wants the RCs any more. :)

(I have a set of those for sale, PM me if you want more info).

--Ian