Originally Posted by rmcelwee
(Post 512478)
This is the first time I have looked at anything on the forum other than "Insert BS" and it is a question about a JRSC???
Anyway, this is #1. #2 would be the same but with an AC pulley in there somewhere. http://www.lightweightmiata.com/jrsc/sc/sc11.jpg FWIW, you can find a ton of JRSC info on my defunct sebring website mirror: Page Title Awesome, that helps a bunch, thanks. |
Originally Posted by rmcelwee
(Post 512478)
Anyway, this is #1. #2 would be the same but with an AC pulley in there somewhere. |
You may be able to get away with the track dog one. It should provide the same basic tensioning function and does it matter too much where abouts on the belt it's doing so? It looks like it mounts on the same bolts as my Stage One Tuning bracket did (similar to track dog) so I think it should work out alright. You could always buy it, line it up and return it if it doesn't work.
As for p51, well that's just what happens when people try to show off online. |
Originally Posted by Toddcod
(Post 512541)
Well, guys this is a supercharger section. I like both. That is why I have a P1sc Procharger and a STS Turbo kits for my Vetts.
rmcelwee, That is a nice tensioner! I haven't seen that one before. |
If that pulley appears, let me know!
AB |
Originally Posted by p51hellfire
(Post 511613)
your a waste of bandwidth
|
Originally Posted by MoD_Scotty
(Post 512582)
Are you done yet?
|
Any way you could fit an autotensioner from a 6 rib kit in there?
You could use some string wrapped around the pulleys you have to find the belt length you need. |
1 Attachment(s)
I've got your same setup, 91 No PS with A/C. I got the S/C kit from a PS A/C car and ordered a new bracket from MOSS to replace the stock idler.
I've attached the only pic I've got right now. My experience with MOSS was less than helpful on this install. The belt that works on my setup is not what MOSS said worked. Gates K040500........ 50 5/8 which is the P/S pump belt from a 89-94 taurus sho was the winner. right now the car is waiting for a new differential in Virginia, but I can take more pics on the 20th if you need them. |
Thanks for the help with the pic. I'm going to try bolting it up this weekend, and I think I can make it work with what I've got. The guy at Moss who was the most knowledgeable about these kits unfortunately left the company a few months back.
AB |
What bracket are you going to use?
|
I purchased a non PS, non AC kit, and it came with a single pulley and bracket. It looks like the bracket bolts up where the OE PS bracket would be. I also purchased a few small parts that were part of the AC only kit that weren't listed in my kit.
AB |
All times are GMT -4. The time now is 11:30 PM. |
© 2024 MH Sub I, LLC dba Internet Brands