TDR Rotrex Update with Dyno Charts!
Did someone ask for Dyno Charts? Please let us know what you think and share the news!
Click here for the latest new about the TDR Rotrex kit |
Very nice. I'm assuming it can make more power with a build motor?
robert |
Finally! Now make that oil cooler that fits down low on the passenger side like we talked about last week!
|
Were AFR's mapped for those runs?
|
nice torque.
|
Nice. Glad someone is making progress on a rotrex kit!
I'm slightly skeptical of the dyno charts (mostly the 1.6), just based on what Mobius and a few others have done on more heavily worked over 1.8l engines. |
Originally Posted by Braineack
(Post 1277307)
nice torque.
Originally Posted by dcamp2
(Post 1277419)
Nice. Glad someone is making progress on a rotrex kit!
I'm slightly skeptical of the dyno charts (mostly the 1.6), just based on what Mobius and a few others have done on more heavily worked over 1.8l engines. :giggle: |
Originally Posted by 18psi
(Post 1277420)
:giggle::hatecat:
I bet the fuel and timing is "SUPER OPTIMIZED" with those power cards :giggle: I'm sure it's fine for most... Especially those who will appreciate decent power gains for minimal installation work and fuss. |
Originally Posted by dcamp2
(Post 1277422)
I'm sure it's fine for most... Especially those who will appreciate decent power gains for minimal installation work and fuss.
|
:hustler:
|
Originally Posted by 18psi
(Post 1277426)
:hustler:
|
I bet they achieved those numbers using Stoly as an octane booster.
|
Wow. 310 injectors? When I make 220hp I'm using 75% duty cycle of my 610cc injectors.
|
Tone down the hatorade, turbo-lovin biggot
:giggle: |
1 Attachment(s)
|
Eh. I'd love to give this kit a try. Looks pretty simple to install. I'll use my MegaSquirt, though.
robert |
Originally Posted by mgeoffriau
(Post 1277425)
Seriously. I thought maybe, maybe after half the forum had gone back to N/A builds we might be past throwing shade at every non-turbo setup.
|
Originally Posted by 18psi
(Post 1277428)
I bet they achieved those numbers using Stoly as an octane booster.
my simple ass turbo setup, that was simple and easy to install, made more torque after it suffered foreign object damage and the turbine wheel was contacting the housing while spinning. |
Nice numbers. I'd love to see this kit with a proper ems.
|
Why did the original dyno on the 1.6L Sunburst stop at 5500RPM? Is that the factory redline for that car? (I honestly do not know.) If that's the factory redline, what work was performed to allow it to spin to 7250?
|
All times are GMT -4. The time now is 10:51 AM. |
© 2024 MH Sub I, LLC dba Internet Brands