#$%^&* Anti-Rattle Spring
So, I had been feeling a slight vibe in the back when getting on the binders hard. Pulled things apart to inspect and re-lube the slider pins. One of my little anti-rattle "W" springs popped off and, apparently, vaporized in mid-air.
Can't find one locally. PO'd. Hate doing things half-ass. Anyone run without the anti-rattle springs? Arrggh!! |
Edit: I'm dumb
|
Uhhhhhhhhhhhhhhhh is it just me or is he talking brakes lol
|
No. Talking about brake hardware. Still fuming. Can't find the darn thing anywhere. I'm working in a garage with a concrete floor. How can it just disappear like that???
:vash: |
Did it fall down in that area behind the hub? By the shock? Or did you stick it in your pocket? Or did you set it down somewhere in/on the car? Things don't just vanish....
|
I betcha its on the other end of the garage under the door lip...
|
I'm sure it's right next to the one ball bearing which rolled off the bench and onto the floor while I was rebuilding my front hubs.
|
I'm not using any springs or shims in the rear - the Hawk pads didn't fit with the hardware. I don't have any problems.
|
Originally Posted by dgmorr
(Post 767688)
I'm not using any springs or shims in the rear - the Hawk pads didn't fit with the hardware. I don't have any problems.
Anyway, found a new set of caliper hardware locally today, and I'm all buttoned up. Usually, the trick to finding the part you lost is to buy a new one. Alas, that didn't work in this case. My "W" spring, Joe's ball, and countless socks remain in another dimension. Thanks for letting me vent guys! |
Originally Posted by hornetball
(Post 767720)
Thanks for letting me vent guys! |
1 Attachment(s)
|
Brake pad hardware... :blah: That shit is for the luxury car guys. Who needs all of those anti-______ springs and clips. Caliper, pad, rotor, it stops. So you might have a little extra noise from time to time, or a strange pop in the pedal, or incorrect wear..... maybe it would be nice to have that little missing spring after all, but I doubt you will miss it.
PS, one day I'm going to find the other end of that black hole that steals our shit, and I'm going to retrieve the hundreds of things I have lost over the years working on cars. I like to picture an alien world with piles and piles of random auto related items. Screws, nuts, bolts, clips, sockets, ect. Some aliens are living the life off of my pocket change that has vanished under my seat, somehow to never return again. |
I haven't used those springs in the last 10 years.
I like the cobalt pads, and they are designed with notches sized to not even use the little stainless wear clips either and I haven’t noticed any ill effects. Bob |
|
Our Australian delivered cars don't even come with them. You can't order them from Mazda Australia either. I only know what you are talking about because a set of them came on my JDM Roadster race car.
|
Well, I think it's settled then. Caliper hardware is for pussies. And, most of us have been visited by part-stealing aliens.
As far as letting me vent vs. me just venting . . . it's a fine distinction . . . but it makes a difference . . . and I'm even more content now. My friends call me Rick, but you can call me Dick. :fawk: |
As I was skimming down, I was going to make a comment that when you find the clip, you can return all my single socks that have gone missing...lol
The best way to find things is to roll the car out of the garage, close the door, turn the lights off and put a flashlight on the floor and scan....or have your woman come out and look for it, she'll find it in .37 seconds. FTR I've always run them. |
I ------- HATE these M or W clips.
Just fitted Carbotech XP8's on the rear (xp10s on the front) and those clips drive me crazy. Is the consensus here that it is okay to not fit them still? |
I just replaced my rear calipers. I installed the springs, but I find it hard to believe they really do anything, being so flimsy. They only take a thumb and finger to install, so how much force are they actually exerting? Not a whole hell of a lot.
|
They keep the pads from rattling.
I've ran without them, the pads do indeed rattle. And the springs did indeed stop the rattling. Go figure. |
All times are GMT -4. The time now is 09:33 PM. |
© 2024 MH Sub I, LLC dba Internet Brands