Any cheaper alternatives to FCM bumpstops?
Anything cheaper we can use, but still get the same quality?
I know the manufacturer of the bumpstops is the same for FCM, FM, and GC. |
FCM are pretty cheap as is.
|
I ran these with my Illumina setup. I'd be willing to bet they are identical to FCM's. $48 for a set. Roughly $20 cheaper than FCM. I used the stiff linear. Fit the Illumina and Bilstein shafts perfectly.
http://www.ground-control-store.com/...php/II=10/CA=1 But really, for a $20 savings, you might as well give your business to a Miata guy. Unless you are as broke as me, in which case $20 matters. |
Good post, been thinking about that as well. The GC stiff linear is the best I've seen so far.
|
Depending on the type you want, the KYB dust boots for the miata come with a nice progressive urethane stop made by BASF. $10 apiece too.
|
Google "foam shock bump stops" and some other variations of that as you think of them. You'll find some different stuff out there running around $10 each and up. Up to you to figure if they'll work in your application vs. the proven stuff available from FM, FCM, etc.
|
http://www.hondapartsnow.com/genuine/honda~rubber~51722-SR0-003.html
I bought mine at www.hondapartsdeals.com. You cut the bottom ring off (fine tooth hacksaw works best) and you have a 50mm bump stop on the cheap. YMMV, buyer beware, etc., etc. |
All times are GMT -4. The time now is 10:06 PM. |
© 2024 MH Sub I, LLC dba Internet Brands