Axle seal
I thought my pinion seal was leaking, but after cleaning up the diff I see that the axle seal on the driver's side is leaking. The exhaust is real close and probably cooked it. It will get heat wrapped. I need to go over the procedure to replace the seal. If I remember correctly. Disconnect the sway bar and the uprights and I should be able to yank the axle? Pry out the old seal, tap in a new one. Put the clip so the open end is up, on the axle. Push it in. If I missed anything or got it wrong, please someone let me know. Thanks.
|
All times are GMT -4. The time now is 08:57 AM. |
© 2024 MH Sub I, LLC dba Internet Brands