Big Brake set up
I see everybody is interested in big brakes that are junkyard parts so I figured I would post the set up I used on my old miata.
Parts list 03 era mustang 2 piston front callipers and braket (PBR) not cobra Focus SVT rotors redrill for 4x100 pattern 12in front 11in rear 3/8 flat bar for front, hole set up Is simple no interference I am not sure on rear setup due to I used 86-92 mustang 8.8 with 4 link with rx7 calipers but should be simple bracket for miata rear brake mount I would use a larger master cylinder you loose some pedal |
All times are GMT -4. The time now is 01:04 PM. |
© 2024 MH Sub I, LLC dba Internet Brands