"Bolt on" Proportion Valve option
Came across this looking for any possible "Bolt on" valve options. I have a Wilwood valve on my NA but wanted to eliminate required adapters if possible.
Looks like it has more range than the wilwood Toyota FJ40 M10x1.0 female inverted flare - 1inlet_1outlet $65 https://www.cityracerllc.com/product...ines-fits-fj40 Enjoy |
Cool. I might need this after I install my dynapros
|
What’s wrong with the adapters? FM sells the whole enchilada.
|
Originally Posted by Project:Kinzy
(Post 1523267)
What’s wrong with the adapters? FM sells the whole enchilada.
|
More potential leaks, looks crappy, more weight, more expense. This valve also provides a higher range of adjustability.
|
Wilwood sells one now that is M10x1 so no adapters needed anymore with that one either by the looks of it.
https://www.wilwood.com/MasterCylind...emno=260-12627 |
Originally Posted by julio
(Post 1523777)
Wilwood sells one now that is M10x1 so no adapters needed anymore with that one either by the looks of it.
https://www.wilwood.com/MasterCylind...emno=260-12627 They do make this one with 3/8 IF ports. If you're using short lengths of NiCopp lines to patch the prop valve in, it at least lets you avoid NPT. https://www.wilwood.com/MasterCylind...emno=260-10922 |
Good point. I've got the SAE Wilwood I've had sitting around I've not put on yet. I've got my car all apart and just went and looked at the NIB 929 1" master cylinder I was going to put in with it and just noticed the rear port is inverted flare and the front looks like a bubble. WTF??? Why would Mazda mix them on a master cylinder? Maybe there was another fitting that screwed in there on the 929's. I'm glad you mentioned that and made me look. I'll have to go read some of the 929 master cylinder posts and see if that was normal and I just forgot about it. Anyways, sorry not trying to thread jack...….
https://cimg5.ibsrv.net/gimg/www.mia...338294576d.jpg |
Originally Posted by julio
(Post 1523896)
just went and looked at the NIB 929 1" master cylinder I was going to put in with it and just noticed the rear port is inverted flare and the front looks like a bubble. WTF???
|
Now that you mention that I do remember that and had meant to pick one up since it didn't come with it. I better find one before I forget again...……..
|
Yeah and the OEM two-female-inverted-flare-to-one-banjo T fitting is unobtanium. Ask me how i know.
|
Luckily I've got factory ABS so I think I only need the single. Just checked and Mazda still has those available if I want the factory part. I need to quit dicking around and get this thing done before I forget how everything works.
|
Make your own thread about your own problems :jerkit: :rofl:
|
We have yet to find a need for more range than the Wilwood valve offers. Indeed, if a driver/mechanic ever needs to run the valve all the way closed, there is generally a mismatch in the brake system that needs to be dealt with. A prop valve only caps peak line pressure. It does not affect bias at lower line pressures. So if you need your prop valve maxed at either extreme, your brake bias at low line pressures (trail braking) will by definition, be way off. An inline prop valve is a tool to fine tune straight line threshold braking balance, not a cure for a mismatched brake system.
The valve kit for the Toyota has a single adapter per line, the line not directly attached to the valve. Our valve also has one adapter per line, to convert the inverted metric flare to the 1/8NPT on the valve. |
All times are GMT -4. The time now is 10:36 AM. |
© 2024 MH Sub I, LLC dba Internet Brands