bottom front ball joints
Why is there what looks to be 2 different bottom ball joints listed?
There is what looks like a ball joint that has a plate under it with holes in for the bolts and there is what looks one that has tube across and a single hole. sorry for my description but its a whilecsince i stripped the doner car. I am fabricating my own wixhbones and i know what top ball joint to use with the same taper (BMW). I'm just not sure on the bottom. Paul |
There is a long bolt/ nut that goes through the ball joint in the horizontal direction ...Then there is a vertical bolt from the top that threads directly into the ball joint
Be careful. Cheap no name ball joints may have incorrect thread pitch on the vertical bolt. I bought a cheap NB that the previous owner left that bolt out because the ball joint was replaced with a crappy one with the wrong pitch. |
Originally Posted by 240_to_miata
(Post 1191968)
I bought a cheap NB that the previous owner left that bolt out because the ball joint was replaced with a crappy one with the wrong pitch.
|
So what is the other one that I.....
ahem..poorly described? It's advertised on ebay as MX5 lower ball joint |
Dealer or dont bother for lower ball joints on these cars, same with tie rods.
|
ok dealer is best got it;)
thats not what i was asking though see these 2 links off ebay...... MAZDA MX5 1.6 1.8 04/1998-10/2005 LOWER BALL JOINT Front Off Side | eBay and then these FBJ5447 Ball Joint Front Axle,Left,Lower | eBay if the second one i posted fits the taper then these are what i want to fit to my tubular wish bones on my MX5 engined classic mini. Paul |
The second one pictured is not a lower ball joint for a Miata. That's the difference. It looks like an upper for a '68-72 GM A-body car.
|
All times are GMT -4. The time now is 01:19 AM. |
© 2024 MH Sub I, LLC dba Internet Brands