soloracer

iTrader: (10)

I'm missing 4 of these - the ones that mount the top hats to the body. Anyone know for certain what size they are? I need to go look for some after work and don't have time to run home. I think it's an M6x1.25 but I'm not positive.

I must have let 4 of mine go with my old suspension when I sold it....

Thanks!

soloracer

iTrader: (10)

Dang it...nobody knows for certain?

chpmnsws6

iTrader: (12)

M8x1.25 on the NB if that helps

Rallas

iTrader: (9)

M8 sounds right. I know the NA and NB threads are the same. Make sure you use a thread locker with non OEM nuts. I had two missing once and used nuts from Lowes, they were loose in a week even though I torqued them to factory specs and I have never had this problem on any of my other Miatae.

NoiseRacing

This is correct.

I also lost hardware store nuts that fall off, I ended up purchasing some flange nuts from Fastenal. They have been there for 2 seasons and are torqued nicely.

soloracer

iTrader: (10)

Yep. Confirmed 8x1.25. Got some nuts and lock washers at an auto parts store. They say "prevailing torque" but they don't behave like lock nuts.

I'm going to a local fastener specialty shop tomorrow to see about flanged lock nuts before I commit to these and red thread locker.

hosspoons

As I said, the same size as the measuring stick in your pants.

soloracer

iTrader: (10)

Those nuts are at least an M60x2