Engine/Trans Plate?
Hey all, going thru my whole drivetrain currently and when I removed the OEM sandwich plate between the engine and trans, I misplaced the 10mm bolt that holds it in place while installing it and so it doesn’t move under load and hit the flywheel. Anyone know the correct thread size/pitch/length or have a link/part number for that bolt or one to sell?
|
M6x1mm about 6mm long.....
|
Originally Posted by Alejo_NIN
(Post 1631198)
M6x1.25 about 6mm long.....
M6x1mm, with a 10mm head, as you have a lot of all over the car. I have never seen 1.25 pitch on M6. |
Originally Posted by NiklasFalk
(Post 1631218)
Uhm, NO!
M6x1mm, with a 10mm head, as you have a lot of all over the car. I have never seen 1.25 pitch on M6. |
All times are GMT -4. The time now is 03:37 AM. |
© 2024 MH Sub I, LLC dba Internet Brands