Getting ride quality back. Going the opposite direction of most of you.
Well, I'm in a pickle. I had to sell my truck to help pay for some medical expenses for my wife and now the ol' autox prepped Miata is on DD duty for a bit until the finances recover.
My current setup is Tein Flex coilovers with 9kg/6kg springs, hyperflex bushings all around, FM solid front sway bar and adjustable endlinks. Riding on bald RS2's around 15x8 6ULs. Front ride height is just under 12". Rear is just under 13" so I'm lowered, but not really slammed. Corners like a dream. But rides like a dump truck. There doesn't feel to be any rear suspension travel (common with the Tein's), and my setup just kind of bounces over bumps instead of absorbing them. My back can't take this day in and day out. Like literally can't. Can't EVEN, even. Have you ever driven in South Louisiana? The orange construction barrel is our state animal.... Anyway, I digress. If you found yourself in my situation, what would you do? Respring the Tein's? Ditch the coilovers and go with some static shocks (Like the FM 1.5 Tokico or Koni option)? I would love to get some rubber back in my suspension bushings, but I destroyed the bushings removing them and I haven't had much luck finding replacement stock rubber bushings without having to replace the entire set of control arms, which is prohibitively expensive at the moment. All these stupid poly bushings do is squeak and hurt my back. Worst. Mod. Ever. |
is this temporary or for a long time?
if temporary, pick up a stock suspension for cheap and voila. if long term, pick up a set of fm/tokicos |
Thinking permanent. I was never 100% satisfied with my Tein setup anyway.
|
Tokikos/fm springs are what you want. I just sent you a pm about a used set I have that I am not currently using.
|
I'm on the same boat as you, but in a different way.
Stock setup that needs replacing, but I wouldn't sacrifice height and comfort. I want to be able to pass speed bumps at a regular speed. Since the Tokico Illumians for nb's are gone for good I don't really have a choice in the entry level budget. The MeisterR that m.net raves about nowadays seems promising, but I'm unsure how civilized it is. |
Originally Posted by yossi126
(Post 1330980)
I'm on the same boat as you, but in a different way.
Stock setup that needs replacing, but I wouldn't sacrifice height and comfort. I want to be able to pass speed bumps at a regular speed. Since the Tokico Illumians for nb's are gone for good I don't really have a choice in the entry level budget. The MeisterR that m.net raves about nowadays seems promising, but I'm unsure how civilized it is. |
if you cant sacrifice comfort, you should not consider coilovers
the difference is nothing Lars, if they are assembled units, they will work. only diff is spring perches and tophats |
Lift it off the rear stops, bet it's worlds better.
|
Have you looked over the better bilstein coilover thread? I just assembled a set for my car and I've been really happy with them. I know it's not saying a whole lot, but they're 1000x more comfortable than my BC coilovers were.
|
Amen. Comfort wasn't a concern on a racecar, because, well...racecar. I wouldn't have put coil overs on my ride if there had been any thought to this car ever becoming a daily driver.
Followup up question on the FM setup: Are the rear upper mounts worth it? They are back ordered for an indeterminate amount of time anyway. |
Illumina/FM is a pretty good place to be for a reasonably affordable, comfortable daily that'll still perform a bit.
|
Originally Posted by shuiend
(Post 1330982)
I was planning on putting NA Tokico's on my NB. Not sure what the actual differences are.
|
top hats.
|
Originally Posted by yossi126
(Post 1330991)
Let me know how this works out.
|
Originally Posted by Braineack
(Post 1330993)
top hats.
As far as bushings, it'd prolly cost you what some stock control arms would, but you could go delrin and at least get rid of the squeaks! Alternately, a big 2" thick piece of foam, and some earplugs would ameliorate your issues. |
I can recommend NB top hats, aftermarket bumpstops (FatCat comes to mind and they really help when you bottom out to the travel), stock springs, NA tokico illuminas. Grippy, comfortable, ride height looks right, and plenty of travel. I can't recommend them enough for a DD. Oh, and cheap.
|
Raise the car up. Getting more bump travel should make it way better. I drive around on Koni Yellow with what is basically an 8k/6k set up (450/350lbs/in) and it is fine. Then again, I am a spry 26 year old...
|
travel is only important if youre riding the bump stops currently
the other two: damper valving and spring rates, are just as important for me, the harsh ride on most suspensions is not from bottoming out. its the constant nvh and harshness from stiff springs, and constant jerking up/down from stiff valving. if you hit a dip big enough to hit the bump stops, it's usually absorbed decently assuming you're not bro stanced low |
Originally Posted by x_25
(Post 1331114)
Raise the car up. Getting more bump travel should make it way better. I drive around on Koni Yellow with what is basically an 8k/6k set up (450/350lbs/in) and it is fine. Then again, I am a spry 26 year old...
all the coilovers were super comfortable for me when I was younger trust me, you can't even comprehend it for now :) |
Instead of the FM rear top mounts, look at the Goodwin Racing ones. They are cheaper and might be in stock.
I, too, have a NB Illumina/FM Spring combo that I am not using. |
All times are GMT -4. The time now is 05:18 AM. |
© 2024 MH Sub I, LLC dba Internet Brands