Ground control
With my ground control coil over kit from my NA work on an NB? That's all....
__________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
You could do some trimming on the NA hats to fit (or on the chassis). I had a set of Koni yellows and eBay collars and springs. I didn't make it past the rear, but the length of the shock looked correct and the bolts on the NA hat lined up...but the center hole on the NB was too small for the NA hat to fit through.
And, the spring perch was different enough between the two that I didn't feel comfortable putting it together. And, the thickness of the NB hat bushings is thicker than the NA, so I couldn't get the shaft through far enough to get the nut on the threads. It could work, but I gave up and sold them to a friend with a NA. |
Are you swapping the illuiminas too and don't you have NB mounts on them already? If so, yes they will work, you'll just have to adjust the ride height.
|
Just swap out the top hats to your NB top hats and youll be fine.
|
I will probably get new Illuminas since these already have like 25k on them. So I would order NB Illuminas, I would obviously have Nb top hats and the NA GC coil overs.
__________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
spring are springs d00d. except i know the nbs has those stupid lower perches.
|
All times are GMT -4. The time now is 08:20 AM. |
© 2024 MH Sub I, LLC dba Internet Brands