NB 1.8 brakes on 1.6 car?
Hey,
Does any body know if stock brakes from a 2000 miata base will work on a 1991 car? Can the 1991 calipers work on the 2000's brackets? I got calipers, brackets, rotors and pads i can buy from a 2000 and wondering if they will work on my 1991. Thanks in advance! |
Swap all or none.
|
Are the brackets from NB 1.8's different then 94-97 1.8's?
|
No.
There are 1.6 brakes, 1.8 brakes, and Sport brakes. |
Ok, can you take a look at these two links i have. In both it says that you just need the brackets, rotors and pads from a 1.8. The one suggests you need them from a 94-97 but i have seen elsewhere that 94-02 use the same brackets. According to these two links the 1.6 calipers should work with the 1.8 brackets? Correct me if that is wrong, thanks for your reply.
How to Go Slow Fast https://www.miataturbo.net/useful-sa...upgrade-10997/ |
I don't really know anything about 1.6 stuff other than that it's trash. If you have the complete setup available to you, then use that. Seems way easier and zero chance of failure.
|
My sport brake setup was maybe 100$ dig through my build thread for part numbers
|
It does make sense but the 1.8's are rustier and higher mileage compared to my minty 1.6 units. Would get the 1.8 cars calipers just to have as spares and clean them up, they will be cheap anyways but prefer to use mine if i can.
Anybody that knows more about this that can respond? |
If you want 1.8 calipers / pads, you need a complete 1.8 setup. Nothing from the 1.6 imho is interchangeable with the 1.8 series of brakes.
In 01-05, Mazda created "sport brakes" where the pads and rotors were bigger. There is some interchangeablility between the sport and non sport brackets and calipers, but you'd have to dig into that rabbithole yourself. If you want the biggest stock brakes you can get, grab a complete sport front and rear. If you want the most pad choices, pick up a non sport 1.8 brake setup. Tldr: you want 1.8 or 1.6 brakes: you can't do both, Pads, calipers and brackets are unique for each. |
Originally Posted by jtt
(Post 1514658)
If you want 1.8 calipers / pads, you need a complete 1.8 setup. Nothing from the 1.6 imho is interchangeable with the 1.8 series of brakes.
In 01-05, Mazda created "sport brakes" where the pads and rotors were bigger. There is some interchangeablility between the sport and non sport brackets and calipers, but you'd have to dig into that rabbithole yourself. |
The only difference between 1.8 caliper ans 1.6 calipers in the front is which hole is the big one is flipped. You just flip the brackets from side to side and you can use either caliper.
Source: I have 1.8 brackets and brake pads on my 90 and I just used the same calipers. (I have the m-tuned BBK though and use corrodo rotors). The rears are the same, brackets just swap right on. |
Originally Posted by Savington
(Post 1514660)
This is highly inaccurate. 1.6L calipers will fit onto 1.8L brackets just fine. Since time immemorial, the "common" brake upgrade for 1.6L cars was to order pads, rotors, and brackets for a 1.8L car and swap them without changing the caliper itself.
|
All times are GMT -4. The time now is 04:09 AM. |
© 2024 MH Sub I, LLC dba Internet Brands