Pls. identify this shock tower brace
 

Unfortunately I can't find the end pieces.

https://www.miataturbo.net/attachmen...1&d=1374349173

https://www.miataturbo.net/attachmen...1&d=1374349173

ebay

Tanabe. Same profile as the one in my RX7. Does an OK job, but is heavy.

end peices
 

the mounts for that are going to be realy high for a N/A miata. Not much of a bend in the bar. Any decent shop should be able to make a mount for you.

Toonabee would have something etched in the alum...prolly ebay. The reason you cant find the end pieces is because they broke.

Thanks all.

I plan to buy a 2nd one and use them as raw material for a V brace from rollbar to windshield header.

90 01 99 00 Mazda Miata MX5 MX 5 Front Upper Aluminum Strut Tower Bar Brace | eBay

Sucks. They jacked up the price. I bought mine a few years ago for $28.

Hmm, that one has bends much sharper than mine.

Mine is fairly flat like that. The mounts have a full circle on the bottom which is supposed to make it more effective. It reduced cowl shake anyway. Wouldn't you want to make a roll bar to windshield header brace out of something stronger?

it's different that the one i have, but looking at it gave me an idea to bolt it to a joist in the basement and make a pull-up bar with it.

I wouldn't trust eBay metal with my weight.

Keith Tanner posted this on miata.net a while ago...

https://www.miataturbo.net/attachmen...ine=1375395386

--Ian

To be fair, the STB in my orig pic is waaaay sturdier than that towel rack.