Rear wheel bearing swap help
6 Attachment(s)
Hi,
I was swapping my rear wheel bearings, and this seal came out from somewhere and I don't know where it goes. Here are some pictures of the seal on the right: https://www.miataturbo.net/attachmen...ine=1357793449 https://www.miataturbo.net/attachmen...ine=1357793449 I don't think it's the seal on the inner/diff side of the knuckle, because that's still there. I'll also add that in the process or removing the old bearing, I used a hammer on my 29 mm socket, which consequently got stuck in one of the inner races of the old bearing. The interesting thing about this is that you can then use the old bearing to evenly hammer in the new bearing, using the old bearing as a buffer, as not to mess up the new bearing. |
Pics no worx
|
Borken pictures ...
|
Ok idk why they won't work for you guys, try this if it still doesn't work morshu's albums - Imgur
|
They work now. In for answers.
|
|
2 Attachment(s)
Upon disassembly of the other hub/knuckle, I figured out where it came from.
https://www.miataturbo.net/attachmen...ine=1357800814 https://www.miataturbo.net/attachmen...ine=1357800814 It came from the old wheel bearing. It fell out because of my beating on the other end :loser: |
All times are GMT -4. The time now is 06:05 AM. |
© 2024 MH Sub I, LLC dba Internet Brands