Shock covers @ Supermiata
 

Just in, shock covers for all Miata shocks, front and rear. 300 or 360mm lengths. Measure your full spring pack length at full droop to decide which length to order. NA/NB Xida & Tecna take 300mm front and rear. NC, ND Xida take 360mm. Some two piece shocks may use shorter covers. Optimized for 2.5" springs but will fit 70mm Tein. Velcro closure can be installed without removing shocks. Heavy denier nylon with waterproof polyurethane coated inside. These protect the shocks even better than snug fitting rubber accordion boots.

Now standard on all Xidas and available separately.

https://949racing.com/product/xida-s...elcro-closure/

https://cimg5.ibsrv.net/gimg/www.mia...47638c7d39.jpg

https://cimg6.ibsrv.net/gimg/www.mia...d3f4976080.jpg
https://cimg9.ibsrv.net/gimg/www.mia...db65caa906.jpg

https://cimg3.ibsrv.net/gimg/www.mia...7174b65435.jpg
Can confirm, these jimmy hats look quite flash.

I'll have to snag a set for my Techna at some point. I had the Inertia Labs ones on my Xida and they really have done an amazing job.