vteckiller2000

iTrader: (4)

I installed the GS diff bushings, but the rubber fingers on the lower mount covers don't even come close to touching the diff case. The diff can move about 0.5" up and down and causes a bunch of noise and clunking.

aidandj

iTrader: (5)

No issues here. Got pics?

vteckiller2000

iTrader: (4)

Will have to get when I get home. I am driving the car and it is far too low to get a good pic.

deezums

iTrader: (3)

lol

vteckiller2000

iTrader: (4)

Seems helpful.

Leafy

iTrader: (1)

I feel like you've done the install wrong. The nut on the stud that goes through the mount should be clamping that metal piece with the rubber fingers to the diff casing. I think you put that nut on in the wrong spot.

vteckiller2000

iTrader: (4)

Wut?

The nut is the last thing I installed. It cannot push the rubber fingers to touch the diff because the delrin bushing stops the cupped portion of the mount. While the bushing is tight between the body of the car and the lower mount cup thingy, the diff case ears can move along the height of the bushing up and down.

Leafy

iTrader: (1)

You put the flange of the delrin part at the top right?

vteckiller2000

iTrader: (4)

Yes I did.

Leafy

iTrader: (1)

Well thats odd. I dont know what to tell you then. I'm kind of glad now that I ended up just buying ebay FC delrin diff mounts for my car because garage star was out. They fit well enough.

aidandj

iTrader: (5)

The delrin bushing should be shorter than the case. If the bushing is sticking out then its too big.

greddygalant

iTrader: (3)

No fitment issues I had one of the first sets too