Agx/GC is somewhat common. Of course not the best but it is a setup.
|
0 - your stock blown shit
250 - racelands 300 - used bilsteins, ebay coilover 450/350 450 - tokico illumina,ebay coilover 450/350 450 - kyb agx,ebay coils,qa1 350/250,nb tophats 500 - used bilsteins, ebay collars, qa1 springs 700/400, nb top hats 750 - koni sports, collars, qa1 springs 800 - revalved bilsteins, ebay collars, qa1 springs 700/400, nb top hats 800 - used tein flex 850 - tein basic 1000 - D2 custom valved and sprung 1100 - tein ss 1200 - koni race, collars, qa1 springs 1400 - bilstein pss9 1500 - tein flex 1650 - fatcat 1900 - jic magic a2 1800 - tein mono flex 2000 - afco 2100 - v2 fatcats 2700 - xida s 3000 - Ohlins DFV 3800 - xida i moved the d2's because if anyone wants a set, i can get them to you for $1000 instead of $1150. so far they feel great, but i have yet to track them. will know more soon. i put the kyb agx down the list from the tokico illumina because although they handle a higher rate spring, and every click makes a bigger difference than the kyb, they actually are not as adjustable. if you run the spring rates mentioned on the tokico's, you can only use the highest settings (4 and 5) the kyb although they supposedly barely change on a dyno, i could feel and tune every click on them. also with 350/250 springs, i had a useable adj. range of 2-8 clicks for street to track, dry to wet track conditions. i know this because i have another car with 350-250 springs and 1-3 clicks on the tokico's range from 1 - blown or no shock installed feel, to 3 - cadillac eldorado valving. and 240-to-miata, i've beat many cars on double or triple the cost coilovers. it takes some reasearch, but with the right combination of hardware, agx's can work pretty well for dirt cheap. |
250 - racelands
300 - used bilsteins, ebay coilover 450/350 450 - tokico illumina,ebay coilover 450/350 450 - kyb agx,ebay coils,qa1 350/250,nb tophats 500 - used bilsteins, ebay collars, qa1 springs 700/400, nb top hats 750 - koni sports, collars, qa1 springs 800 - revalved bilsteins, ebay collars, qa1 springs 700/400, nb top hats 800 - used tein flex 850 - tein basic 1000 - D2 custom valved and sprung 1100 - tein ss 1200 - koni race, collars, qa1 springs 1400 - bilstein pss9 1500 - tein flex 1650 - fatcat 1900 - jic magic a2 1800 - tein mono flex 2000 - afco 2100 - v2 fatcats 2700 - xida s 3000 - Ohlins DFV 3600 - Moton Club Sports 3800 - xida 3960 - Koni 2812 ( likely more if you want them custom valved, but you never know) |
Stance should be on the list. I have no idea what they cost.
|
ok, this is a nice comparison. how about a quality/performance hierarchy? or is that too subjective?
|
Originally Posted by miata2fast
(Post 495434)
Stance should be on the list. I have no idea what they cost.
250 - racelands 300 - used bilsteins, ebay coilover 450/350 450 - tokico illumina,ebay coilover 450/350 450 - kyb agx,ebay coils,qa1 350/250,nb tophats 500 - used bilsteins, ebay collars, qa1 springs 700/400, nb top hats 750 - koni sports, collars, qa1 springs 800 - revalved bilsteins, ebay collars, qa1 springs 700/400, nb top hats 800 - used tein flex 850 - tein basic 1000 - D2 custom valved and sprung 1100 - tein ss 1129 - Stance GR+ 1200 - koni race, collars, qa1 springs 1400 - bilstein pss9 1500 - tein flex 1650 - fatcat 1900 - jic magic a2 1800 - tein mono flex 2000 - afco 2100 - v2 fatcats 2700 - xida s 3000 - Ohlins DFV 3600 - Moton Club Sports 3800 - xida 3960 - Koni 2812 ( likely more if you want them custom valved, but you never know) |
Originally Posted by Chris Swearingen
(Post 495409)
3960 - Koni 2812 ( likely more if you want them custom valved, but you never know)
I put together a set of non-adjustable Bilsteins using ATAD bodies and B46 shafts. They are monotube with threaded aluminum bodies and the B46 shafts have the correct pin-top. They can be revalved at home as long as you have a nitrogen bottle and recharging tool. Total cost for the shocks was $920. I added Elephant racing spring perches and mono-ball top mounts made from NA mounts and some circle-track parts. http://www.gwracing.com.au/uploads/product/5/asn.jpg |
Originally Posted by modernbeat
(Post 496255)
2812s come valved to your specs. There is no off-the-shelf version. Every one is custom assembled, although some orders are assembly only, and some require minor machine work - like pin tops for Miatas. They do not come with springs, top mounts or bushing adapters like some of the other options listed.
Buying them direct from Koni or one of their resellers might net you the valving you are looking for without the revalve cost. Not sure what Koni's list price is. |
Originally Posted by hustler
(Post 494655)
I'm going to get rid of the Flex next year and get something with comp and decomp adjustability. I'm no pro by any means, but I see the short comings of the flex damping and would like more comp in the front, less comp in the rear, but more decomp in the rear. I also want more droop in the front, and I have the front's so stiff that apparently they're jacking, but i don't know what that feels like.
I imagine that by the time I get those set up, I'll wish I had low/high adjustability too. ***Edit - I feel pretty good now knowing I got the Flexes used for $600. |
How do you get the koni race for $1200 the shocks alone are $250 each with out springs or anything. should be $1400 for Koni race + GC
|
Maybe K-sport should be on the list? do not now the price though....
|
300 - used bilsteins, ebay coilover 450/350
750 - koni sports, collars, qa1 springs 800 - revalved bilsteins, ebay collars, qa1 springs 700/400, nb top hats 1200 - koni race, collars, qa1 springs 1650 - fatcat 2000 - afco 2100 - v2 fatcats 2700 - xida s 3600 - Moton Club Sports 3800 - xida 3960 - Koni 2812 /THREAD /UNSUBSCRIBE PM me if you want to send me monies for making things a bit easier for you fuckers. |
250 - racelands
300 - used bilsteins, ebay coilover 450/350 400 - used FM's stage 2.5 v1 450 - tokico illumina,ebay coilover 450/350 450 - kyb agx,ebay coils,qa1 350/250,nb tophats 500 - used bilsteins, ebay collars, qa1 springs 700/400, nb top hats 750 - koni sports, collars, qa1 springs 800 - revalved bilsteins, ebay collars, qa1 springs 700/400, nb top hats 800 - used tein flex 850 - tein basic 940 - FM's stage 1.5 v2 1000 - D2 custom valved and sprung 1100 - tein ss 1129 - Stance GR+ 1200 - koni race, collars, qa1 springs 1400 - bilstein pss9 1500 - tein flex 1650 - fatcat 1900 - jic magic a2 1800 - tein mono flex 2000 - afco 2100 - v2 fatcats 2350 - Ohlins PCV 2700 - xida s 3000 - Ohlins DFV 3600 - Moton Club Sports 3800 - xida 3960 - Koni 2812 ( likely more if you want them custom valved, but you never know) added a few. |
I'm on Koni Sports Yellows for my '99 and Eibach bars.
Had RB springs. They sucked because the rears were bottoming constantly. Got weirdly non-linear at the limit and went sideways as soon as I got on the throttle past the apex. Changed them out to OE MSM springs I picked up for $70, and it's much better. Ride height is within 1/4" of stock. No more bottoming, and really linear and predictable until it starts to slide. Haven't tracked it yet, but I'm expecting it to be as good as I need, even after the turbo gets done. With both setups, 1/8 turn of the Konis makes the difference between all messed up and just right. Not sure where the $750 comes from for Koni Sports, collars and QA1s, but use that shock price and add $70. I'm happy with it. The hard part is finding the springs. |
I ordered the Fat cat coil overs 450F 325R And I have to say the customer service alone is enough to make me buy them. But from what I hear they are pretty good on the track ;)
|
Does anyone know anything about the koni sport springs you can get koni sport yellows matched to these springs in a package here?
|
Koni's web site has a ton of info if you take the time to dig through it all and find what you're looking for. Not sure spring rates would be on there, though.
My instinct is that "sport" springs like that won't have enough rate to keep it off the bump stops with the 35mm of lowering that's stated in your link. |
250 - racelands
300 - used bilsteins, ebay coilover 450/350 - value 400 - used FM's stage 2.5 v1 450 - tokico illumina,ebay coilover 450/350 450 - kyb agx,ebay coils,qa1 350/250,nb tophats 500 - used bilsteins, ebay collars, qa1 springs 700/400, nb top hats 750 - koni sports, collars, qa1 springs 800 - revalved bilsteins, ebay collars, qa1 springs 700/400, nb top hats 800 - used tein flex - value 850 - tein basic 940 - FM's stage 1.5 v2 1000 - D2 custom valved and sprung 1100 - tein ss 1129 - Stance GR+ 1200 - koni race, collars, qa1 springs - value, better than flex IMO 1400 - bilstein pss9 1500 - tein flex 1650 - fatcat - the best street setup money can buy 1900 - jic magic a2 1800 - tein mono flex 2000 - afco 2100 - v2 fatcats 2350 - Ohlins PCV 2700 - xida s 3000 - Ohlins DFV 3600 - Moton Club Sports 3800 - xida - the best money can buy 3960 - Koni 2812 ( likely more if you want them custom valved, but you never know) There are a lot of options, but only a few popular/good ones. -Bilstein/ebay/QA1 is a great beginning setup. Lets you revalve with FCM later and learn your car now. -Used Tein Flex is the best track deal going. They have their limitations, but for most they are great. -KONI RACE is, IMO, better than Flex. The rates will be higher, and while you have to deal with the super-short travel, if you run the car low with a good diff it's not a huge deal. Add a lot of power and you'll need an OS Giken to deal with it, but that's probably true with any suspension. -Revalved FCM Bilsteins are the best riding suspension, hands down, end of story. Try a set, it will blow your mind. They are spendy, though. -Xida-S should be great, although I've never driven a set they should be nearly as good as the Xidas, although a bit less versatile. -Xida, the best money can buy. I don't even think a Koni 28 is worth it, because Emilio's done the revalve work for you. Disturbingly good. |
i'll probably be dreaming of xida's in a few minutes!
|
250 - racelands
300 - used bilsteins, ebay coilover 450/350 - value 400 - used FM's stage 2.5 v1 450 - tokico illumina,ebay coilover 450/350 450 - kyb agx,ebay coils,qa1 350/250,nb tophats 500 - used bilsteins, ebay collars, qa1 springs 700/400, nb top hats 750 - koni sports, collars, qa1 springs 800 - revalved bilsteins, ebay collars, qa1 springs 700/400, nb top hats 800 - used tein flex - value 850 - tein basic 930 - P5 sportdrive 940 - FM's stage 1.5 v2 1000 - D2 custom valved and sprung 1100 - tein ss 1129 - Stance GR+ 1200 - koni race, collars, qa1 springs - value, better than flex IMO 1400 - bilstein pss9 1500 - tein flex 1650 - fatcat - the best street setup money can buy 1900 - jic magic a2 1800 - tein mono flex 2000 - afco 2100 - v2 fatcats 2350 - Ohlins PCV 2700 - xida s 3000 - Ohlins DFV 3600 - Moton Club Sports 3800 - xida - the best money can buy 3960 - Koni 2812 ( likely more if you want them custom valved, but you never know) P5 sportdrive added, too soft springrates for the most of you, but what im going to run soon. Been getting good results and reviews. Across the pond from most of you though. MX-5 performance parts, suspension, shocks, superchargers, turbochargers, exhausts, brakes and servicing - Performance 5 |
All times are GMT -4. The time now is 12:24 PM. |
© 2024 MH Sub I, LLC dba Internet Brands