Who has broken a 6 speed?
Mine is starting to make bad noises at high revs in 3rd and 4th. Sounds like gear teeth rattling.
Curious if it was the sound of eminent failure. Bob |
thesnowboarder just broke one.
Bob, parts are cheap. I paid $360 in labor and $250 in parts to have my 5/R shift fork, selector, reverse synchro and gear replaced over the winter. Open it up and have it looked at before something goes really bad and wrecks multiple gears. Sounds like I need to find a spare gearbox. |
Originally Posted by Savington
(Post 560764)
thesnowboarder just broke one.
Bob, parts are cheap. I paid $360 in labor and $250 in parts to have my 5/R shift fork, selector, reverse synchro and gear replaced over the winter. Open it up and have it looked at before something goes really bad and wrecks multiple gears. Sounds like I need to find a spare gearbox. Sav: Under what conditions was snowboarders six speed when he broke it??? |
i think he downshifted to 3rd....and CABLAM!
|
Is there a shop out there in Miataland that knows the ins and outs of building a stronger 6spd box?
|
Downshifted to 4th and it let go. He hasn't opened it yet.
Jay, nobody makes/builds a stronger 6-speed box except the MSM boxes with the shotpeened gears. TSB is the first one I know of to fail during road course use. My box looked perfect when I had it open. If I do start breaking stuff, just start filling it with MSM gears. If the gearbox lasts 2 years at these power levels, that's acceptable to me. |
oh yeah! it was 4th, my bad.......
|
You guys need to stop this thread.... especially as i just tossed a 6spd in a week or so ago.
Then again... I don't plan on power enough to break a 5spd.... so i better be safe :p |
Bob I have a 6 speed with a broken housing let me know if you need some parts.
|
I too just installed a 6 speed after blowing my 5 speed so fingers crossed!
|
I should have the new motor in with the 6 speed in a couple weeks, tranny should be broken not long after that I imagine lol.
On a side note, none of my 5 speeds made any noises before breaking. |
I have 16-hours on my 6-speed at 250whp and although I haven't had the best lap times in the world, the car is driven like a warrior. I have no symptoms or noises of any kind.
I also have a metal clutch...which needs to come to an end. TheSnowboardingQueer also had about 300whp if not more going through the trans too. |
My 6 speed is making rattly gear stripping noises at high revs in second and 3rd gear maybe 4th too.
The 5 speeds I have broken 3 different ways. Stripping second or third was just a loud bang at full acceleration right about the point in the RPM range where I am making peak torque. The ones I broke the gear that drives the secondary shaft on all would make loud squealing noises on coast down after a hard use for a little while before Kablamo. I need to get a spare before I take this one out and try and figure out what’s going on. Dang it, driving a Miata this fast is expensive. I can’t afford some of the upgrades I want if I keep spending so much money keeping it rolling. Bob |
Originally Posted by 90GTK450
(Post 561211)
Bob I have a 6 speed with a broken housing let me know if you need some parts.
I might be interested in that. I need to get a spare first and I got to save up some cash flow first. I got another 5 speed I can throw in if I have to for a couple weeks if it goes Kaboom. Bob |
Originally Posted by Splitime
(Post 561097)
You guys need to stop this thread.... especially as i just tossed a 6spd in a week or so ago.
Then again... I don't plan on power enough to break a 5spd.... so i better be safe :p
Originally Posted by bbundy
(Post 562784)
Dang it, driving a Miata this fast is expensive. I can’t afford some of the upgrades I want if I keep spending so much money keeping it rolling.
Bob Video of said blown 6-speed: http://www.youtube.com/watch?v=c4nD0-FNiH0 I guess ill yank it out this week and see what kind of damage happened. To be fair to the transmission, I do not treat is nicely, lots and lots of fast/hard shifts. I can say i never really did a stand still burn out or clutch popping on it though. |
Mike blew one up at TWS this weekend.
|
Doing what? Hardparking in the paddock? Making 900whp Mile passes? Please don't tell us, I thrive on suspense.
|
Originally Posted by jacob300zx
(Post 562858)
Mike blew one up at TWS this weekend.
How much power is Mike putting down? Metal clutch? |
what happened to the shot peened gears on all 6 speed 01+ trannies theory?
|
Originally Posted by frostyllama
(Post 563344)
what happened to the shot peened gears on all 6 speed 01+ trannies theory?
|
All times are GMT -4. The time now is 03:30 PM. |
© 2024 MH Sub I, LLC dba Internet Brands