Who makes offset lower control arm bushings cheep?
Looking for offset lower control arm bushings so I can get some more camber in the car.
I found them here: Miata Suspension But $80 but some little bushing :jerkit: |
Made in the low volumes I'm sure ISC does, $80 isn't honestly a bad price for the time/effort to make them. That I've seen no one else currently makes any.
I made my own from Delrin bar stock and used the inner liners from the ES poly bushings that would have been in that spot. Total cost was just the Delrin at about $17. If you have any access to a lathe/mill or know someone who does that's the cheap way to do it. |
Originally Posted by Rennkafer
(Post 507499)
Made in the low volumes I'm sure ISC does, $80 isn't honestly a bad price for the time/effort to make them. That I've seen no one else currently makes any.
I made my own from Delrin bar stock and used the inner liners from the ES poly bushings that would have been in that spot. Total cost was just the Delrin at about $17. If you have any access to a lathe/mill or know someone who does that's the cheap way to do it. Want to make me a set or two? |
I can see getting those to remove camber maybe. Just lower your car a lil and youll be able to get all the camber youll ever want.
|
Originally Posted by slutz4
(Post 507533)
I can see getting those to remove camber maybe. Just lower your car a lil and youll be able to get all the camber youll ever want.
|
All times are GMT -4. The time now is 09:03 AM. |
© 2024 MH Sub I, LLC dba Internet Brands