Anyone running these wheels? (ATS 15x8)
#1
Anyone running these wheels? (ATS 15x8)
Mazda Performance Parts: ATS 15x8 DTC COMP SUPERLIGHT, 30mm offset, 4x100, 4x108...IN STOCK NOW--SPECIAL!
13x8 +30mm
Just wondering fitment on stock fenders (with roll of course). Would it be realistic to run a 225 NT01 on these without major rubbing issues?
These seem like a good buy price wise.
13x8 +30mm
Just wondering fitment on stock fenders (with roll of course). Would it be realistic to run a 225 NT01 on these without major rubbing issues?
These seem like a good buy price wise.
#5
I have them. They are mounted up with 225/45-15 NT-01. With a fairly light spring, 350/250, 12/12.5 ride heights, the fronts rub like a **** on both the lip and the top liner bolt on the autocross course. Rub so bad that the tire pulls the lip down after a hard run. On a road course, when you pull >1.1 man Gs, the rear will rub, as well. I would highly recommend a roll with these wheels, and remove the inner liners from the front.
A pic from the p.o. of the car sporting these wheels with a 225/45-15 RS-2.
A pic from the p.o. of the car sporting these wheels with a 225/45-15 RS-2.
#8
What kind of bar is that? It looks taller than usual. May just be the angle of the shot, though.
I have them. They are mounted up with 225/45-15 NT-01. With a fairly light spring, 350/250, 12/12.5 ride heights, the fronts rub like a **** on both the lip and the top liner bolt on the autocross course. Rub so bad that the tire pulls the lip down after a hard run. On a road course, when you pull >1.1 man Gs, the rear will rub, as well. I would highly recommend a roll with these wheels, and remove the inner liners from the front.
A pic from the p.o. of the car sporting these wheels with a 225/45-15 RS-2.
A pic from the p.o. of the car sporting these wheels with a 225/45-15 RS-2.
#13
Always like those wheels allot. I had a set in 15x7 (on both my cars in my sig pic), and the 15x8's were like finding the holy grail, so I was really surprised when Goodwin started selling them again. If I were you, I'd buy 5 just in case you damage on some day, because once Goodwin sells out of them, I doubt you'll be able to find them anywhere else.
C
C
#15
I am turbocharged, had 210-220 whp on a bone stock 1.6 last year, building up a 1.8/'00 head for 2010. The grip from this setup is amazing, I use maxqdata and can find 1.15+ Gs with no gravity helpers (banking, suspension compression, etc). Everyone needs NT-01 goodnezz.
#16
Wow He finaly got those back. I have a set of the 15X8 ATS's and I really like them. It is just that my 9" wheels have made them Obsolete. I’m thinking of keeping them as my street wheels and selling a set of 15X8 6ULs I have because I like the way the ATS’s look on my car better. Also need to get rid of the some Team Dynamics.
My current quiver of wheels looks like this.
15X9 6UL two sets
15X8 6UL one set
15X8 ATS Comp lite one set
15X7 Team Dynamics Pro Race 1 one set
15X7 Sprint Hart CPF one set.
With the 30 offset and 225 tires you will need to roll the fender lips.
Bob
My current quiver of wheels looks like this.
15X9 6UL two sets
15X8 6UL one set
15X8 ATS Comp lite one set
15X7 Team Dynamics Pro Race 1 one set
15X7 Sprint Hart CPF one set.
With the 30 offset and 225 tires you will need to roll the fender lips.
Bob
#17
He posted back in March that he received 10 sets. I wonder if he's still selling those 40 wheels, or if he keeps replenishing stock.
ATS 15x8 Back in Stock!
C
ATS 15x8 Back in Stock!
C
#18
He posted back in March that he received 10 sets. I wonder if he's still selling those 40 wheels, or if he keeps replenishing stock.
ATS 15x8 Back in Stock!
C
ATS 15x8 Back in Stock!
C
Bob
Thread
Thread Starter
Forum
Replies
Last Post
Greasyman
General Miata Chat
2
09-28-2015 10:44 AM