Originally Posted by Clifton
(Post 1596207)
What kind of torque does a 600 whp Rotory make?
|
I ordered a set of 225/50r15 Mickey Thompson ET Street R's I'll let you know how they do at 600+ whp
|
Originally Posted by patsmx5
(Post 1596248)
Here's a video of what doesn't fit. Going for similar whp.
LOL IRL at the walkthrough. "This is hitting, this is hitting, that WILL hit, and this critically important upper shock mount is in the way..." Lenso also did a 15x3.5 et10 skinny for the Hondas to use as a rear. I wonder if it would fit over a stock front brake. |
https://cimg8.ibsrv.net/gimg/www.mia...aa95340727.jpg
Right about 550 RWHP on the rollers on wastegate spring pressure. https://cimg0.ibsrv.net/gimg/www.mia...2a6ce8a169.jpg Current diff setup with a FD RX7 pumpkin and diff cradle all solid mountings. https://cimg2.ibsrv.net/gimg/www.mia...3b9fe00937.jpg The new Lenso's installed with 24.5 x 8 out back. https://cimg9.ibsrv.net/gimg/www.mia...6b3a8dacce.jpg The front and rear suspension is way out of alignment and way to much squatting going on out back, it was hopping down the whole track had to let off about 100FT from the 1/8th |
This is where I'm at with mine. Still got to cut the fenders and do flares, and some other stuff, but they're closer to fitting now.
https://cimg4.ibsrv.net/gimg/www.mia...2af824a8ac.jpg https://cimg3.ibsrv.net/gimg/www.mia...8c244c416a.jpg |
Rear Suspension
Car currently has what I would assume are some Ebay quality coilovers all around. Went to the drag strip Friday night and the car was bouncing out the hole violently, I am also having issues with excessive toe out on the front wheels which made the car even more wayward, but should have the front end aligned this week . But what do the serious people run for a drag coil over or rear suspension, I am going to be installing v8 roadsters rear control arms to eliminate as much movement as possible. I feel like the springs are too soft and/or rebound is too high. If nothing else I will build a custom set of rear QA1 coilovers with dual adjustments and test out a few diff spring combinations.
Video is on Instagram if anyone would care to inspect and leave their 0.02c @mr_amor_305 |
I dont have an instagram account but would sure like to see a video of that thing shooting flames 6 feet out that fender exit exhaust while building boost on the 2 step. LOL.....
|
4 Attachment(s)
|
|
Had a nice weekend at the Sport Compact Finals in Orlando, best time was a 9.868 and 142MPH. The suspension is still not fixed the alignment helped the front end, but every launch moves the rear control arms move way out of place and change toe angles to the point the car is violently going left. Have a set of V8 Roadster control Arms on order and next is a set of dedicated drag shocks and a PARACHUTE!!!
|
That bad boy does like to move around! Get it sorted and she should have a lot left in it. What size turbo and how much boost? What fuel? Motor sounds pretty heavily ported. Bridge ported?
|
Originally Posted by Newaza
(Post 1613746)
That bad boy does like to move around! Get it sorted and she should have a lot left in it. What size turbo and how much boost? What fuel? Motor sounds pretty heavily ported. Bridge ported?
|
Thats pretty rad. You've got me covered for sure LOL... Might have to keep an eye out for pat if he ever gets his finished though....
|
Originally Posted by Newaza
(Post 1613748)
Thats pretty rad. You've got me covered for sure LOL... Might have to keep an eye out for pat if he ever gets his finished though....
|
Wild!
That guy Pat is the hardest worker I know! Just a bit more to be faster than the Plaid Tesla. https://cimg3.ibsrv.net/gimg/www.mia...90ef46c8e7.jpg |
With a car pointing in the right direction and a respectable 60FT I should be able to match that Tesla... LOL
I have a few more pounds to take out of the car as well as she is still kinda heavy @2210 LBS. Need to remove the crash bar in the rear bumper, gut the doors minus the roll up windows, Fibergalss trunk lid, remove fuel tank and install a few cell and remove all the sound deading |
https://cimg2.ibsrv.net/gimg/www.mia...9f1b1adf0a.jpg
Anyone has a clue where to find one of these for the rear subframe? I already ordered a CX Racing brace but want to add this as well, so I have no more excuses. |
What offset?
Originally Posted by Chris Amor
(Post 1613279)
https://cimg8.ibsrv.net/gimg/www.mia...aa95340727.jpg
Right about 550 RWHP on the rollers on wastegate spring pressure. https://cimg0.ibsrv.net/gimg/www.mia...2a6ce8a169.jpg Current diff setup with a FD RX7 pumpkin and diff cradle all solid mountings. https://cimg2.ibsrv.net/gimg/www.mia...3b9fe00937.jpg The new Lenso's installed with 24.5 x 8 out back. https://cimg9.ibsrv.net/gimg/www.mia...6b3a8dacce.jpg The front and rear suspension is way out of alignment and way to much squatting going on out back, it was hopping down the whole track had to let off about 100FT from the 1/8th |
All times are GMT -4. The time now is 02:55 PM. |
© 2024 MH Sub I, LLC dba Internet Brands