What wheels to go with Tuckin99 N2 Flares??
11-01-2009, 09:01 AM
#42
Elite Member
Thread Starter
iTrader: (11)
Join Date: Jun 2007
Location: Meriden, CT
Posts: 2,065
Total Cats: 1
Yea, but my wallet hates wats...
Nice! Thanks the info...they do look like a good option. At first I was accidentally looking at the series 85 wheels and was like WTF... the 15x10's were like $400 per wheel... like you say though, the series 82 wheels are the way to go...15x10 $249 ea and weight 15.5lbs...not bad at all! The 13x10 $228ea and weighs in at 10lbs...I think this wheel has moved its way to the top of my list!
Series 82
Series 82
Last edited by Cspence; 11-22-2009 at 10:22 PM.
Reply
0
0
11-01-2009, 10:22 AM
#45
Elite Member
Thread Starter
iTrader: (11)
Join Date: Jun 2007
Location: Meriden, CT
Posts: 2,065
Total Cats: 1
Anyone have any ideas on what rubber to run on these size rims...13x10, 15x10, 16x10...I've been poking around for a little while and can't seem to find any good performance tires for this width rim...for the 15, we'll probably need like a 245/45/R15 or maybe even a 255 series tire...This may end up being the determing factor as to which rim diameter I would like to run....
PROXES T1-R 245/45 ZR16 94W with rim protection ridge
PROXES T1-R 245/45 ZR16 94W with rim protection ridge
Last edited by Cspence; 11-01-2009 at 10:44 AM.
Reply
0
0
11-01-2009, 11:46 AM
#47
Elite Member
Thread Starter
iTrader: (11)
Join Date: Jun 2007
Location: Meriden, CT
Posts: 2,065
Total Cats: 1
Reply
0
0
11-01-2009, 01:39 PM
#50
running a spacer and running low offset put the same amount of strain on the hub.
just sayin. wouldnt completly off the spacer if the right set of wheels come along and are just barely out of your spec it might help. but i also understand you not wanting to run a spacer.
just saying dont rule it out
just sayin. wouldnt completly off the spacer if the right set of wheels come along and are just barely out of your spec it might help. but i also understand you not wanting to run a spacer.
just saying dont rule it out
Reply
0
0
11-01-2009, 01:48 PM
#51
btw guys i hope you know those steel rims are a bitch to balance. A lot of people run them on wranglers (my previous vehicle). Even with the 35" tall tires by 12.5" wide they were still tough to balance even when the tire was spun around to match the opposite of the rim... aka heaviest on the tire goes to the lightest on the rim...
I know alot of people that switched to aluminums and removed more than half the weight the steelies took to balance. I've seen those things take up to an lb of weights to balance.
If you are going to run a spacer get the one that has its own set of studs.
I know alot of people that switched to aluminums and removed more than half the weight the steelies took to balance. I've seen those things take up to an lb of weights to balance.
If you are going to run a spacer get the one that has its own set of studs.
Reply
0
0
11-01-2009, 02:06 PM
#53
Elite Member
Thread Starter
iTrader: (11)
Join Date: Jun 2007
Location: Meriden, CT
Posts: 2,065
Total Cats: 1
running a spacer and running low offset put the same amount of strain on the hub.
just sayin. wouldnt completly off the spacer if the right set of wheels come along and are just barely out of your spec it might help. but i also understand you not wanting to run a spacer.
just saying dont rule it out
just sayin. wouldnt completly off the spacer if the right set of wheels come along and are just barely out of your spec it might help. but i also understand you not wanting to run a spacer.
just saying dont rule it out
The spinwerks are aluminum...
Reply
0
0
11-01-2009, 03:29 PM
#54
it will be harder to balance if its the tires fault however it cant be the tires fault because if you switch to aluminum you should still be having problems while thats not the case. The people i've seen switch from steel to aluminum seem get a good balance afterwards.
Reply
0
0
11-01-2009, 03:41 PM
#55
Former Vendor
iTrader: (31)
Join Date: Nov 2006
Location: Sunnyvale, CA
Posts: 15,442
Total Cats: 2,099
He never made them. He needed 50 people to commit and got like 4. For a while, he said he'd do it if someone bought 200 wheels from him, and then he said he'd never do it under any circumstances, so I don't know where he stands on it now.
Reply
0
0
11-01-2009, 05:14 PM
#57
They are safer than the spacers that simply extend the studs like these.
The reason for that is leverage. When you use the blue spacer i posted above the leverage of the bolts remains the same since the mounting surface remains on the same location. When you add a spacer the mounting surface is much further away from the base of the stud so it creates leverage on the stud.
Basically the blue spacer is not much different than a rim with that same offset. The only thing you have to worry about is the extra nuts that hold the spacer since they are hidden by the rim.
The reason for that is leverage. When you use the blue spacer i posted above the leverage of the bolts remains the same since the mounting surface remains on the same location. When you add a spacer the mounting surface is much further away from the base of the stud so it creates leverage on the stud.
Basically the blue spacer is not much different than a rim with that same offset. The only thing you have to worry about is the extra nuts that hold the spacer since they are hidden by the rim.
Reply
0
0
11-02-2009, 11:27 PM
#58
Elite Member
Thread Starter
iTrader: (11)
Join Date: Jun 2007
Location: Meriden, CT
Posts: 2,065
Total Cats: 1
Yea, but my wallet hates wats...
Nice! Thanks the info...they do look like a good option. At first I was accidentally looking at the series 85 wheels and was like WTF... the 15x10's were like $400 per wheel... like you say though, the series 82 wheels are the way to go...15x10 $249 ea and weight 15.5lbs...not bad at all! The 13x10 $228ea and weighs in at 10lbs...I think this wheel has moved its way to the top of my list!
Series 82
Nice! Thanks the info...they do look like a good option. At first I was accidentally looking at the series 85 wheels and was like WTF... the 15x10's were like $400 per wheel... like you say though, the series 82 wheels are the way to go...15x10 $249 ea and weight 15.5lbs...not bad at all! The 13x10 $228ea and weighs in at 10lbs...I think this wheel has moved its way to the top of my list!
Series 82
Anyone know of another company similar to spinwerks (Price ~$250ea. /weight ~15#'s) that offer a 15x9...for some reason they don't offer them. They go from 15x8's to 15x10's. If I did go with them, I think I'd be picking up the 16x9.5's since the tire market is most favorable to that size from the research I've done. The best performance tires arn't available, but some moderate ones are. The selection is at least better than whats available for the 15x10. Once I get the flares in, at least I'll be able to see what offset will be necessary to fill them, which should help me with the search for wheels. Thats the one nice thing with these custom wheel companies....you can have them make the wheels to any offset. But like you said Tyson, I could always run a spacer....maybe I'll run 15x9 6ul's with a 2" spacer
Reply
0
0
