1.6 crank and pulleys
I'm getting ready to rebuild the motor in my festiva and I need a big nose 1.6 crank. It would help if you have the pulleys hip also.
|
If you check my WTB for bent rods thread, a guy posted that he had a spare crank that he would be willing to sale. I am not sure if it is a 1.6 or 1.8, but might be worth asking about.
|
Damnit so much, if you would have posted 2 weeks ago, I could have sold you everything you wanted out of a 1.6 big nose.
|
Crap I always miss out on stuff like that. Still looking.
|
Are you looking for the harmonic damper and mounting boss setup? IE: the thing that bolts to the crank with one big bolt, and the thing that bolts to that with 4 small bolts.
I've got a damper that I bought from the dealer and used for less than 10k miles and the original boss from my 1.6, in perfect usable shape with ~140K miles. One thing about the harmonic damper is the locator pin on the boss I was using it with fell out, causing all 4 bolts to successively loosen and fall out until only 1 was remaining. All 4 holes in it are slightly rounded, I supposed this could be fixed somehow, but won't need to bother with it because I'm running a 1.8 pulley setup now. |
I may have found a whole motor that I can get what I need off of. Ill let you know if that falls through and I still need the damper.
|
I have a 1.6 crank damper pulley for small nose crank
|
I have a 1.6 complete engine that I can part. Long-nose. I don't know what shipping on the crank and pulley would be though.
|
I thought I found a whole motor but that fell through. Still looking for a crank.
|
Got one
|
FYI the long-nose 1.6 and pre-95.5 pulley boss is the same. 95.5-05 pulley boss is also same but thinner to account for the toothed gear.
crank pulleys are different for all 1.6 and 1.8 because 1.6 uses v-belt for alternator/water pump |
All times are GMT -4. The time now is 02:16 PM. |
© 2024 MH Sub I, LLC dba Internet Brands