1.6 exhaust bracket
 

Anyone happen to have the metal exhaust hanger bracket that bolts to the frame near the shipping eyehooks from the driver's side rear? Not the rubber part, but the metal part the rubber hanger attaches to on the car. Figured I'd ask first before fabbing something up.

you talking about the piece that is welded to the muffler or on the body end?

Body end. Bolts to frame with 2 bolts.

This? Part # B690-40-080A

Nope. It's the one that attaches under the rear driver's bumper at the back of the car.

dee dee dee
reading pwnz me

B690-40-690

if it is indeed #40-230(that is a horrible description of the location) i have one on the machine that isn't used with my custom exhaust. actually i should have one on the merlot. i'll look tonight.

edit: just checked on the Merlot. not present. I know for a fact it's on the Machine though. I think the nut on the other side broke free so it'll take drilling the bolt. Let me know if you need it.

Dammit, maybe it doesn't exist then. It was a hanger there for my FM duals, but it snapped when I removed my old exhaust, and there is the same hanger on my Enthuza duals so I assumed it was a stock part, but I guess not. Weird.

From your diagram, the way the muffler has two hangers on the passenger side and only one on the driver's side, there is another hanger (on both set of duals) that is even further back on the driver's side.

Yeah Tom, had a feeling you were talking about that. That part came with the FM Duals. Fab something up.