1.8 factory engine harness
 

My '99 has a 1.6 run by a Haltech, but I'm looking to put a 1.8 back in it and run it with just the OEM harness and ECU for the time being. The motor I'll be using is from an '01, so I'd like to find a complete, uncut harness that will work. Please let me know if you have a spare or where might be a good place to look for one, thanks!

I have a harness in my 96 that I was just gonna forget about, if you need it and you think it will work for you let me know, I'll help you out.

No he'll need an 01 type harness, it's very different. I *might* have one from my 01 motor. I'll check.

Cool, thanks Ben, I had no idea...
btw-you got the mounts ordered yet? What was the total? My friend broke his, again.

No, I'll sit down this weekend and make the order. Need to get all the TB/WP stuff.

Yep. If you have it, that's be great! Let me know.

I have an '01 harness. There was one connector that wasn't being used (3 wires) from the previous owners parallel Motec install. I'm pretty sure it is for the CAS. If I pull the colors tonite I can tell you what the plug is for. The PO put a GM style plug on it but it was taped off. I can throw in the female end to that plug too since I have spares and pins for it. Everything else is intact.

Do you need an '01 ECU also? Got one.

Frank

I think I've found what I needed. Thanks, though!