440cc injectors
anyone have any used ones cleaned and flowed? Or just used and i can send them out thanks
|
low impedance ok?
|
I have a set (6) of low Z supra injectors.
$20 +shipping and they're yours. |
kind of a dumb question but i never knew this...whats the difference between low and high impedance:ugh:
|
one you need to add a resister in the line for it work... not sure which
|
Low impedance (aka Peak & Hold) injectors typically have a series resistance in the 2-4 ohm range. The are capable of faster performance (less turn-on lag) than high-impedance injectors, but only when driven by a PWM-capable ECUs. They can be used with regular ECUs by adding large series resistors to prevent them from being destroyed, though the performance advantage is lost when this is done.
High impedance (aka saturated) injectors are what we consider to be "normal" injectors. They require no fancy drive circuitry. |
Joe, do you really think either one of those guys will actually understand anything you just wrote? :inout:
|
Originally Posted by Ben
(Post 186211)
Joe, do you really think either one of those guys will actually understand anything you just wrote? :inout:
|
All times are GMT -4. The time now is 01:19 AM. |
© 2024 MH Sub I, LLC dba Internet Brands