Dwell Reducer
 

I'm looking for a dwell reduction board or module. Running FM-Link w/ Toy cops. First long trip apparently burned out two cops at the 5 hour mark.

(Toyota COP failures confirmed - I replaced all four and the car started and idled nicely.)

Have you forund the reducer ?

I have this setup I would like to sell. I can ship to you for $210.

I made it so I could swap the Injector/coil harness, install and go for a '99.

The following is included;

The COPS are the Toyota 90080-19015s, 4 are included
The harness is a '99 spliced with new COP connectors and Caps.
2 of the injector connectors have the clip broken and the injector harness is included.
The Dwell reducer is a Boundary Engineering board, all new components, The '99 coil bracket is included as this is where I mounted the reducer.
The COP bracket is the Track Speed version for the NBs, I only mounted it for fitment
There are nylon spacers for the bracket studs with stainless acorn nuts to position the COPS.


Attachment 184427

Attachment 184428

Attachment 184429

Attachment 184430

Attachment 184431

Attachment 184432

Attachment 184433

If you didn't found yet, I've got it new

https://www.miataturbo.net/attachmen...ine=1420229621

https://www.miataturbo.net/attachmen...ine=1420229621

https://www.miataturbo.net/attachmen...ine=1420229621

https://www.miataturbo.net/attachmen...ine=1420229621

super-easy to install, just wire it between the coils and your ecu and it's done
60€ soldered, 45€ soldering kit plus shipment

Let me know if you want more specs