Looking for gt2554r or gt2560r
 

Located in bay area. If you have one let me know details such as miles, shaft play, power it was producing etc... thanks!

What's your time frame?

Trying to pick one up this week.

I have a used 2560. Made 260 hp on VVT motor. No side-side shaft play. I upgraded to a 2860.

GT2560 pix
 

https://cimg7.ibsrv.net/gimg/www.mia...58cc339843.jpg

https://cimg8.ibsrv.net/gimg/www.mia...2505b5af78.jpg

https://cimg0.ibsrv.net/gimg/www.mia...9a7fe93e57.jpgon the left is the 1/8" NPT signal port for a wastegate

https://cimg1.ibsrv.net/gimg/www.mia...aeb7c332b2.jpg

https://cimg2.ibsrv.net/gimg/www.mia...a97e1f8890.jpg

https://cimg3.ibsrv.net/gimg/www.mia...57bd7819b4.jpgHere you can see the divider that keeps the gases from the turbine outlet separated from the wastegate outlet

https://cimg2.ibsrv.net/gimg/www.mia...90ed8fe75e.jpgOn the turbine inlet is the 1/8" NPT port for an EGT sender

Sorry it took so long. My phone died and getting the wife to email these photos to me was like pulling teeth.

The turbo has 15~20k miles on it. Turbine housing was bought used from a Nissan. (I think I still have the original). It has a gas separator for the turbine outlet.
It made ~260 whp at 15 psi and made full boost at < 3000 RPM IIRC, with a 3" cat and exhaust, and BEGI divorced downpipe, and ETD "shorty" tubey manifold. (see my sig below)

There's two 1/8" NPT ports: for the wastegate signal, and an EGT sender.