Looking for a Walbro 190 HP
 

Anyone have one laying arround?

I have a new 255 LHP

Don't want to risk over powering the stock FPR and not looking to touch that yet (if I put in a new FPR I am redoing the fuel lines and... It snowballs from there).

I do not. However, if truly TD04 and 9.5 psi, I would suggest a new OEM. High priced, but good for 15+ years.

EDIT: and the internal check valve really works.

I think I have one laying around at home, at work atm, will let you know in a few hours

Eventual plan is rods only motor, VF35, and 270-280rwhp with as flat of a torque curve as I can get.

My stock FP died the other day and and I figured "while I am in there..." But the 190 HP is backordered everywhere and I don't really want to spend big money on an OEM stock that I am going to have to replace in 2 years anyway.

Let me know! Thanks.

https://cimg0.ibsrv.net/gimg/www.mia...54d1597e89.jpg

Found it, it new.

Let me know what you would want for it shipped to 07843. Any chance you have the electrical connector? If not, they are easy enough to order.