Dennis925

Located in bay area. If you have one let me know details such as miles, shaft play, power it was producing etc... thanks!

JasonC SBB

What's your time frame?

Dennis925

Trying to pick one up this week.

JasonC SBB

I have a used 2560. Made 260 hp on VVT motor. No side-side shaft play. I upgraded to a 2860.

JasonC SBB

on the left is the 1/8" NPT signal port for a wastegate





Here you can see the divider that keeps the gases from the turbine outlet separated from the wastegate outlet

On the turbine inlet is the 1/8" NPT port for an EGT sender

JasonC SBB

Sorry it took so long. My phone died and getting the wife to email these photos to me was like pulling teeth.

The turbo has 15~20k miles on it. Turbine housing was bought used from a Nissan. (I think I still have the original). It has a gas separator for the turbine outlet.
It made ~260 whp at 15 psi and made full boost at < 3000 RPM IIRC, with a 3" cat and exhaust, and BEGI divorced downpipe, and ETD "shorty" tubey manifold. (see my sig below)

There's two 1/8" NPT ports: for the wastegate signal, and an EGT sender.