wherestheboost

iTrader: (-1)

I'm looking for 450/300 or 450/250 2.5" diameter springs. miata friendly lengths please.

anything between 450-500 is cool as well. I'm currently on 550/350, and I'm lookin for something softer.

Braineack

iTrader: (62)

I can sell you 7" 550/300 QA1 springs for dirt cheap...but depending on your shocks, they might not lower you enough.

wherestheboost

iTrader: (-1)

How much for just the 300's? (I already have the 550's)... I'm on Bilstein HD's with GC/FCM sleevse.

Braineack

iTrader: (62)

okay then you should be good, that's what Shaikh said they'd work on. I tried them on Konis with ebay sleeves, I could probably get them down to 13" or so at the lowest due to the perches, but I want a tad lower with room to adjust. I just ordered some new shorter springs and will hopefully swap them out this weekend.

They are brand new and might have 100 miles on them once I pull them, I just put them on Saturday. They $38 new each from summit, so how about $40 shipped for the two?

gospeed81

iTrader: (51)

I might pick up the other two (550s), sent a PM before seeing your last post.

bryanlow

iTrader: (10)

I'll take the 550's if gospeed81 doesn't take them. PM sent.

Braineack

iTrader: (62)

I'll let you guys know. I just put them in this weekend and I'm struggling trying to get them low enough, after my drive home today they are right around 13.5" F/R. I still have a little room to adjust down so if I can get my ride height then i'll want to hold onto to them. I did just buy some 6" ebay 450/350 springs to replace them. But I want to give the QA1s one more shot.

wherestheboost

iTrader: (-1)

ISC mounts will get you lowered...

I've got the same length springs... and I think you could get them down to 12" or lower...

wherestheboost

iTrader: (-1)

Oh, and by the way, I get paid on wednesday - so I will contact you again then! (deal! by the way on the 300 springs).

gospeed81

iTrader: (51)

I let brain know I'm passing on the 550s guys.

So if he doesn't like them then they're up for grabs.

Braineack

iTrader: (62)

That is an option but I'm rather quite cheap.

I'm going to attempt to get the height I want in the front today. I think I'm going to be able to by and in that case I won't have any qa1 springs available. Plus is turns out the ebay springs I ordered aren't the rates everyone says they are, the seller finally wrote my back this morning saying they were 218/123. So I think I'm going to try to get them to cancel to order if they are willing.

If I find out I can get my ride height, then I apologize in advance for prematurely saying they were available. I started at 14" F/R on the weekend when i first put them on and didn't see a way to get them lower, but I still have some tricks up my sleeve.

Braineack

iTrader: (62)

Okay, looks like I gotta the ride height I was looking for after all so I'm keeping the QA1s. When/if the ebay springs arrive I'll let know what the rates are.

Sorry for getting everyone's hopes up.

wherestheboost

iTrader: (-1)

wahhhh. darn. it's cool. thanks though!