WTB 1994 Airbag Module
Looking to purchase a 1994 airbag module, working or potentially throwing codes. Unless it's an extreme value I would like to see pictures of the board to make sure it appears salvageable.
Thanks! |
I have 2001 driver and passenger airbags and module available, if you can swap and make it work. Running order when removed.
PM me if it works for you. |
Originally Posted by Icedawg
(Post 1641118)
I have 2001 driver and passenger airbags and module available, if you can swap and make it work. Running order when removed.
PM me if it works for you. Thanks though. |
I may have one, I will look when I get home tonight.
|
Originally Posted by atotalpro
(Post 1641040)
Looking to purchase a 1994 airbag module, working or potentially throwing codes. Unless it's an extreme value I would like to see pictures of the board to make sure it appears salvageable.
Thanks! but I feel your pain, they are so oddly specific to 94 and simply go bad after, you know, 30 years |
Originally Posted by Dr.Sep
(Post 1641314)
I, too, am searching for a 94 module, the thermal fuse went in mine and I have the 5-1 flashing on my dash. Winter fix for me, have just been driving it
but I feel your pain, they are so oddly specific to 94 and simply go bad after, you know, 30 years |
How do you know that it won't fail again as soon as you plug it in? The fusible link burns out when the system detects an error, rather than set off the airbags unexpectedly. Chances are, if the module is bad, the airbags or sensors are as well.
|
Originally Posted by rleete
(Post 1641333)
How do you know that it won't fail again as soon as you plug it in? The fusible link burns out when the system detects an error, rather than set off the airbags unexpectedly. Chances are, if the module is bad, the airbags or sensors are as well.
I'm planning the clean the boards, replace the capacitors and then finally replace the fuse. I don't have any reason to believe anything outside the module has failed. |
Originally Posted by atotalpro
(Post 1641326)
Im slowing doing some trial and error trying to repair one. I have 4 of them sitting on my workbench at the moment. Hopefully i can at least get one functioning again. I'll let you know how it goes.
|
All times are GMT -4. The time now is 07:27 AM. |
© 2024 MH Sub I, LLC dba Internet Brands