WTB: 2.5" intercooler pipe
 

I need one 2.5" pipe for my turbo set up. I need something that comes off the intake manifold with a curve and goes straight down towards an intercooler. I have something, but it sits too close to the IACV to put a hose on plus it's so close to the plug that it ended up rubbing on the plug's wires, splitting them open.

No I don't have a welder.

I'm open to anything else that has worked for you guys, as long as it has a IACV bung.

Something just like this would be perfect:
http://farm8.staticflickr.com/7183/6...397b4fe9_z.jpg
Note the IACV stuff I need circled. If you have the hose, that'd be awesome as well.

Why not just use a silicone 90 elbow attached to straight pipe? Or whatever it is you have coming up from the intercooler?

That was what I was using. It was too close to the manifold and we couldn't make the IACV bung fit, it was too tight of a space.

Here's what I'm working with. Note the chewed up wires on that plug:
http://farm8.staticflickr.com/7182/6...1c257d63_z.jpg

take it down to an exhaust shop tell them what you want, pay and wait. they will probably even weld on a nipple for the iacv if you bring one that will work.