WTB-> 326cc injectors
 

Two of my injectors got stuck closed after they sat for two months... so i need a new set... the stock 1.8 injectors don't work with 8 psi and an FMU, = 17:1 A/F under boost.

I think that the 315cc would be to small, so if anyone has 326cc injectors ill take them.

Thanks

let me know if you find some.

Thanks zoomin, let me know what you find.

whoa, that was weird!

What was wierd?

Would 1989 Mazda MX6 turbo injectors work? They are 330cc

God, I wish there was an chart of oem injectors what would fit...

The chart says that 90-92 MX6/626/Probe Turbo 326cc - Gray Top injectors would work...but what about 89 626?

I actually thought the 1.8 injectors were good for between 8 and 10 psi. But maybe thats just with a MS rather than and FMU

Yeh ms only.

I am just going to buy these 330cc MX6 Denso turbo fuel injectors DSM Talon Eclipse:eBay Motors (item 380157778966 end time Sep-18-09 09:41:43 PDT)

He says they are 330cc but that part number says that they are 324cc.

I have a set of 1995500-1650's. I looked up that part # and found them belonging to a 1988-89 Mazda 626/MX6 turbo., I don't think they are plug and play, but not sure. Here is my FS add from awhile back. They obviously didn't sell. There was some confusion, the guy I bought them off of said they where off a mazda speed, he lied.

Cleaned and flowed tested at Witch Hunter.

https://www.miataturbo.net/forum/t33215/

OBO

88-89 are not plug and play, require a resistor.

Yeh they are not PNP but they don't need a resistor because they are high impedence like the miata injectors.
http://www.witchhunter.com/flowdatapix/d1955001650.jpg