WTB: Cheap 1.8 Throttle body, no IACV or TPS
Anyone got one they would let go for like $20 shipped? Don't need the TPS or IACV. This is just going to be the pre supercharger one in a dual throttle body setup.
|
I'll take a look when I get home in a few hours. Shipping from 27603.
|
:bigtu:
|
Found it. BP4W off of a 4D motor.
Paypal is 5238901 at gmail Shipping is going to be $5, plus Paypal fees, so pls fax $25 dollars. |
Good shape? I believe that is the one I need to loctite the screws in, yes?
Paypal sent. |
Imgur: The most awesome images on the Internet
Everything outside of the Skunk2 (which has issues on it's own) and JDM models with the damper are susceptible to screw eating. The BP doesn't like being spun up for very long periods of time; however, the issue is well documented. I'll send you a note when it's in the mail. |
Looks like it will match the rest of the engine bay nicely. I will have to get myself some red loctite and do the screws in both throttle bodies then. EDIT: Did some more reading, loctite is not the thing. Will have to find a suitable epoxy to glue everything together nice. We have a nice high temp curing epoxy that wicks into everything at work. Should work nice for this. Will glue the screw to the shaft, and the shaft to the plate.
My B6 loosened the alternator up at the track yesterday, so I am well acquainted with the "shaking everything loose" these engines do... |
It'll be to ya on Monday.
|
All times are GMT -4. The time now is 09:54 AM. |
© 2024 MH Sub I, LLC dba Internet Brands