WTB Driver rear knuckle/upright/hub
 

ABS or non abs, doesn't matter. If the halfshaft is attached that is fine too but has to be one piece type. located in northern virginia.

I have the hub/upright assembly from a non-ABS car, but no axle attached to it. Let me know if you still need one.

I have an entire rear assembly you can have....minus the upper control arms and driveshaft.

someone oversteer into a curb?? :)

thanks

hellfire, YGPM.

Not sure now if i need the upright or not. I am swapping diffs (again) this time between my 90 and my 91. When i originally put the torsen on my 90 I was having a problem with the knuckle pushing forward in the control arms. have a thread on m.net from last summer. turned out to be the upright, and got a new one from parts group

Well, when I took off the wheel last night, it was ever so slightly going the other way, towards the rear of the car. but not bad. So, I guess I will wait and see what happens with it when I put it on the 91. Thanks for the offers though guys, you're the best. Brainy, I got the disk btw, thanks for that.