Exhaust parts 2.5 or 3in.
#4
http://www.mandrel-bends.com/catalog...FQfBKgodrg_rNw
Used to be a sponsor here. I used them for everything to build my V8 exhaust. Good quality, good prices, fast shipping. They have v-bands as well. Nice if building your own DP.
Used to be a sponsor here. I used them for everything to build my V8 exhaust. Good quality, good prices, fast shipping. They have v-bands as well. Nice if building your own DP.
#5
Elite Member
iTrader: (12)
Join Date: Nov 2009
Location: Harpers Ferry WV
Posts: 1,516
Total Cats: 20
Here is a link link to there ebay store witch is where I bought my parts but you can also call them. They are based out of MD and they are a fantastic supplier and great people to work with.
Ebay store-
http://stores.ebay.com/mandrelbendingsolutions
This is the link to their regular web site.
http://www.mandrelbendingsolutions.c...let/StoreFront
Ebay store-
http://stores.ebay.com/mandrelbendingsolutions
This is the link to their regular web site.
http://www.mandrelbendingsolutions.c...let/StoreFront
#6
Elite Member
iTrader: (8)
Join Date: Dec 2008
Location: Kingston, Ontario
Posts: 2,910
Total Cats: 51
http://www.mandrel-bends.com/catalog...FQfBKgodrg_rNw
Used to be a sponsor here. I used them for everything to build my V8 exhaust. Good quality, good prices, fast shipping. They have v-bands as well. Nice if building your own DP.
Used to be a sponsor here. I used them for everything to build my V8 exhaust. Good quality, good prices, fast shipping. They have v-bands as well. Nice if building your own DP.
I wasnt exactly pleased with the surface of the tube, but thats pretty standard for the price point.
#7
http://www.mandrel-bends.com/catalog...FQfBKgodrg_rNw
Used to be a sponsor here. I used them for everything to build my V8 exhaust. Good quality, good prices, fast shipping. They have v-bands as well. Nice if building your own DP.
Used to be a sponsor here. I used them for everything to build my V8 exhaust. Good quality, good prices, fast shipping. They have v-bands as well. Nice if building your own DP.
#10
Thin cheap stuff. You know the little exhaust cuts from autozone that you can get? Same thickness.
Fit is very tough especially around the differential and that bottom pipe. We had to bang on the pipe and squish it a bit just to give it half an inch of flex room and still hits all the way around top and bottom.
Fit is very tough especially around the differential and that bottom pipe. We had to bang on the pipe and squish it a bit just to give it half an inch of flex room and still hits all the way around top and bottom.
Last edited by triple88a; 08-28-2011 at 09:15 PM.
#11
Thin cheap stuff. You know the little exhaust cuts from autozone that you can get? Same thickness.
Fit is very tough especially around the differential and that bottom pipe. We had to bang on the pipe and squish it a bit just to give it half an inch of flex room and still hits all the way around top and bottom.
Fit is very tough especially around the differential and that bottom pipe. We had to bang on the pipe and squish it a bit just to give it half an inch of flex room and still hits all the way around top and bottom.
#13
^^^Would you look at the quality of those joints? Everything was cut with a harbor freight bandsaw, freehand.
There are five v-bands in the exhaust but it can be assembled without unbolting anything else from the car. The diff piece will fit through the subframe.
#18
It is very similar to yours except I'm running the CTS diff.
V bands after the cats before the Y-pipe, and one right next to the diff like you have. Makes dropping the whole thing a 5 minute affair.