WTB: 94-95.5 half-shafts w/ABS toothed rings
05-26-2016, 03:25 PM
#1
Junior Member
Thread Starter
Join Date: May 2005
Location: Tampa, FL
Posts: 150
Total Cats: -6
WTB: 94-95.5 half-shafts w/ABS toothed rings
I am swapping in a 4.1 torsen into my 93LE, when I realized that my half-shafts will fit, but they are non-ABS. Does anyone have a pair of the 2-piece half-shafts from a 94 - 95.5 with ABS?
Reply
0
0
05-26-2016, 10:03 PM
#2
I bought the single piece CV's from O'Reilly 's for about $150 for the pair, and they are plug & play. They have both ABS and non ABS versions. The ABS versions only have a core charge of like $6, which is cheaper than the core charge for the non ABS versions for some reason. They also cut a couple pounds of rotating mass out as compared to the two piece CV's. They come with new 1 1/4" axle nuts.
Just sayin'...
Just sayin'...
Reply
0
0
05-27-2016, 11:29 AM
#3
Junior Member
Thread Starter
Join Date: May 2005
Location: Tampa, FL
Posts: 150
Total Cats: -6
I bought the single piece CV's from O'Reilly 's for about $150 for the pair, and they are plug & play. They have both ABS and non ABS versions. The ABS versions only have a core charge of like $6, which is cheaper than the core charge for the non ABS versions for some reason. They also cut a couple pounds of rotating mass out as compared to the two piece CV's. They come with new 1 1/4" axle nuts.
Just sayin'...
Just sayin'...
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
Savington
Engine Performance
141
12-09-2018 06:06 PM
