WTB: HELP - 1.8 BP Ex Cam Cap Cover w/ Bolts
 

Okay guys

I'm hoping that someone can help a fellow Miata owner in need out. After taking my head to the machinist and rebuilding the block, it appears I have lost a small part that goes in the head. Unfortunately, Mazda does not sell this part alone. And unfortunately, I cannot finish assembling the head without this damn cap. Here is the photo:

http://clearcorners.com/temp/nb02.jpg

Take a look at the back of the exhaust cam area, you'll notice I am missing the metal cover that the valve cover sits on.

I'm sure someone has a bunk head out there, a parts-motor if you will. Please please please, sell or donate the cap.. with the bolts. Beer on me. :-)

Thanks
Mike

I have an extra but its from a 1.6. should still fit but the thing is the cap is honed from the factory to that specific head. so if your sticking a CAS in there and you tighten down the bolts for the cap it wont twist/turn.

lmk

free if you cover shipping

bump - still need this part

if anyone has it, please pm