WTB: ITBs - naturally aspirated tuning parts
#1
WTB: ITBs - naturally aspirated tuning parts
Hi all,
I'm looking for a set of ITB's for either the normal NB (mk2) head or VVT (mk2.5) head.
Along the lines of the TechnoToyTuning kits or Jenveys, so billet adaptors and stuff. I don't like the thought of having any silicone parts holding it together.
Also interested in any naturally aspirated tuning parts too, aggressive cams, VVT cams, shim under buckets, springs etc etc.
Needs shipping to the UK too.
Cheers,
-Lew
I'm looking for a set of ITB's for either the normal NB (mk2) head or VVT (mk2.5) head.
Along the lines of the TechnoToyTuning kits or Jenveys, so billet adaptors and stuff. I don't like the thought of having any silicone parts holding it together.
Also interested in any naturally aspirated tuning parts too, aggressive cams, VVT cams, shim under buckets, springs etc etc.
Needs shipping to the UK too.
Cheers,
-Lew
#2
Did y'all not get Silvertop/Blacktop 4AGE engines in Corollas over there? I just aquired a 90 Celica with a Silvertop swap and it is great. The ITB's scream at WOT. I searched EBay for some misc parts and a few listings did pop up just for the ITB assemblies. If I remember right the Blacktop engines had a slightly better ITB design than the Silvertop.
https://www.ebay.com/itm/4AGE-Toyota...834f%7Ciid%3A1
https://www.ebay.com/itm/4AGE-Toyota...834f%7Ciid%3A1
#10
I've got a N/A setup with 190hp at the flywheel (VD says 170whp)
45mm ITB's, aluminium velocity stacks, 290 degrees cam, 12:1 engine, shim under bucket with stiffer springs, gates racing timing belt, reroute, 4,7kg flywheel, engine with just 750km, 8000rpm redline, full 60mm exhaust: obx manifold, custom centre pipe and cobalt silencer (straight thru exhaust)
engine is based on a vvt block/oil pump/ reinforced strainer and a BP4W head
Everything for 2000€
45mm ITB's, aluminium velocity stacks, 290 degrees cam, 12:1 engine, shim under bucket with stiffer springs, gates racing timing belt, reroute, 4,7kg flywheel, engine with just 750km, 8000rpm redline, full 60mm exhaust: obx manifold, custom centre pipe and cobalt silencer (straight thru exhaust)
engine is based on a vvt block/oil pump/ reinforced strainer and a BP4W head
Everything for 2000€
Thread
Thread Starter
Forum
Replies
Last Post
rlogan
Miata parts for sale/trade
5
05-06-2009 04:02 PM