WTB: NB water temp sensor / harness
 

please. cheap. used. whatever.

is it the same as the NA? I have one without the connector.
degF Resistance
; -4 16150
; 104 1150
; 176 330

What's it look like? Is it part of the main engine harness? I'm sure I've got it, but all my engine parts are in a big bin now.

Frank

honestly I dunno other than it is a two pin connector.

It should be off my main harness. I'll try and find a 2 pin connector. Is the sensor on the t-stat housing? I've probably got that lying around somewhere and can just pull the harness and sensor out and match them up. Gimme a day or two.

Frank

it's on the back of the head near the firewall. sticks up and to the driver's side.

I found a picture! It's up at the very top of the shot. gray and shooting off to the upper left at a 45° angle. the top of the connector just touching the top edge of the image. Right above the end of the water hose.

http://gallery.y8s.com/d/842-3/Dscn1600.jpg

Lemme see what I got. I need to ship the valve cover Friday so I'll dig into the parts.

Frank

i might even give you back your come along. ;)

Did you find this? I'm sure I've got some.