WTB Rods and Any 1.8 Oversized Pistons
Looking for rods and pistons at a reasonable price. My 1.6L SC engine overheated and now has tons of blow-by. So much so that my oil fill cap literally hovers above the fill hole when unscrewed, bought a 2001 engine, and needless to say that the sleeves needed an overbore.
I have been anticipating this upgrade from a 1.6 to a 1.8 for a while now and have been upgrading the 1.6 with all the same upgrades that a 1.8 can use (MS3x, ATI damper, sequential injection, LS2 coils, EV 14 Injectors) in the meantime. My power goals are basically the limit of torque before I need to upgrade the transmission away from a Miata. Items I still need: Overbore Pistons to .020 (83.5mm) (Wiseco, Supertech, w/e) Forged Rods Torsen LSD Most places in So-cal are cool with me for local pick up. |
I've got a set of OEM rods I pulled out of a 1.8L VVT engine.
|
Originally Posted by burdickjp
(Post 1506485)
I've got a set of OEM rods I pulled out of a 1.8L VVT engine.
|
Originally Posted by lyonnate23
(Post 1506529)
I should have said forged rods. My bad.
|
Bump.
|
I hear ya bud but I’m not sure I want to run 11:1 compression pistons on an engine that I plan on running a healthy amount of boost through. |
I have some 11:1 Supertech 83.5 pistons. They have a little bit of detonation marks on the top, but still usable and cheap. $100 plus shipping.
PN: P4-MA8350-P10 https://www.supertechperformance.com...-p4-ma8350-p10 If interested, send me a PM with your phone number and I'll send you some pictures. |
All times are GMT -4. The time now is 06:38 AM. |
© 2024 MH Sub I, LLC dba Internet Brands