WTB: Stock 1.6 parts
I need the following for as cheap as possible. PM me prices shipped to 22408, please don't tell me you have something and not give me a price. I'm putting the miata back to stock and parting it all out and selling the car. Time to buy a house before April 30th so I can collect on the $8,000 credit compliments of all you hard working tax payers!
NEED: - 1.6 Injectors - 1.6 Injector harness UNMODIFIED - 1.6 AFM and intake pipe (Also could use the connector that plugs into the AFM) - Stock 1.6 clutch and PP in good condition - 1.6 stock header (Local preferred) - 1.6 exhaust with cat (Local preferred) Thank, Brian |
pretty sure I have the AFM and injectors, I'll PM you when I find out for sure
|
Have injectors, ready to ship...just give me a price and they're yours.
|
UGH....
$0.01 Read the whole thread next time or BAN. |
Pm'd. Dont rape me.
|
Pretty sure I have every part listed minus the cat, any luck with a local exhaust?
|
Originally Posted by neogenesis2004
(Post 488345)
NEED:
- 1.6 Injectors - 1.6 AFM and intake pipe - Stock 1.6 clutch and PP in good condition - 1.6 stock header (Local preferred) - 1.6 exhaust with cat (Local preferred) Thank, Brian Everything has 100k on it (give or take 2k miles). The clutch just started slipping when I was at 7psi so I removed it then. The exhaust was cut with a sawzaw at the midpipe to muffler portion so a exhaust sleeve and 2 clamps would be needed. Trade all listed for mtuned rods/bolts? |
Damnit.... I just threw out a good clutch and pressure plate, Exedy part too.
I do have good injectors if the other guys fall through...free for shipping. I have the 1.6L injector clips, but not the full harness. I do have a 1.8L fuel rail with a complete harness attached though...should work. |
I have a couple leads on stuff. I'll get back to you guys, thanks for the response thus far.
|
Originally Posted by neogenesis2004
(Post 488625)
I have a couple leads on stuff. I'll get back to you guys, thanks for the response thus far.
- 1.6 Injectors - 1.6 Injector harness UNMODIFIED - 1.6 AFM and intake pipe (Also could use the connector that plugs into the AFM) - Stock 1.6 clutch and PP in good condition - 1.6 stock header (Local preferred) - 1.6 exhaust with cat (Local preferred) so if you need them, let me know, i actually have 2 clutches |
All times are GMT -4. The time now is 04:20 PM. |
© 2024 MH Sub I, LLC dba Internet Brands