WTB: Tein Spring - 9kg/mm OR 8kg/mm
Picked up a set of Tein SS. Came with 7k/6k spring rates and wanted to either switch to 9K/7K or 8K/6K.
Anybody have either the 9k spring or the 8k spring laying around? PM me! -Kris |
I might have my 6K rear springs still floating around. not sure if I sold them or not. I'll check.
|
If you still have them brain that'd be awesome. Let me know.
|
Bump.
SO we just measured the springs and double checked the rates and it turns out that the spring rates on the coilovers we have are actually 7k/6k, NOT 8k/7k like we were told.. So I'm either going to need an 8k or a 9k spring to replace the front spring, and depending on which one it is I may have to transfer the 7k one we have to the rear. Went ahead an edited the first post. I need either an 8k or 9k spring! -Kris |
Whoops, looks like you have the factory spring rates already then.
I replaced my rear springs with a longer set of 6K springs, but something like these might work for you and would save a little over the cost of factory Tein springs: http://www.evasivemotorsports.com/mm...Code=TP708K150 http://www.ebay.com/itm/Tanabe-PRO21...04b92a&vxp=mtr where Tein springs are always $60 each: SA080-01150 It's hard to find 70mm ID springs otherwise. |
Bump! Havent bought new yet.
|
i have a pair of 6kg laying around
|
All times are GMT -4. The time now is 08:35 AM. |
© 2024 MH Sub I, LLC dba Internet Brands