TheMcCoy14

iTrader: (1)

My head gasket blew in my daily so if anyone has a 1.6 motor lying around let me know. I can arrange shipping as well. I have a shop to do the swap and the sooner I fix the car the sooner I can stop taking the godawful city bus to work. Please reply, PM or call 636 233 5074. Thanks.
Ben

jbrown7815

iTrader: (1)

Don't mention your location or anything

TheMcCoy14

iTrader: (1)

Springfield, MO. Appologies.

jbrown7815

iTrader: (1)

Just trying to help you get it quicker



Already check local junk yards, craigslist, etc?

TheMcCoy14

iTrader: (1)

I found someone to do the swap that I trust to do it I just need a motor as the shop wanted 1000 bucks for a motor with 124k on it when I know I can find a nicer one for less. There aren't many of the 1.6's around here. They've all migrated elsewhere it seems. Any leads or offers would be helpful.

GregTSi

iTrader: (1)

Buy a head gasket, and make sure the head isn't warped. It'd be cheaper most likely.

TheMcCoy14

iTrader: (1)

I can't do the work and the replacement of the head gasket at a shop runs about 800-1000 dollars anyway so an extra grand gets me a spair motor and one that dosen't create white smokescreens. You all know any places that source motors or know of anyone that is trying to sell one?

jbrown7815

iTrader: (1)

I have a guy here in Tucson who has his own little Miata Junk yard, sells 1.6's for $250, but I don't think he will ship.


http://tucson.craigslist.org/pts/1810267790.html



Here's link if you want to give him a try. Really nice guy, maybe you can talk him into shipping. If you get desperate maybe I can help you out, buy it from him then get it shipped.

TheMcCoy14

iTrader: (1)

If you have his number it might be worth a shot.

levnubhin

iTrader: (30)

If you don't find anything by the end of next week PM me. I've got a couple of 1.6 up in TN but my friend won't be back until mid week to ship one.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

jedduh01

iTrader: (4)

Planet Miata is up that way actually/

planetmiata.com

Contact Us
Address
1205 Main Street
Swoyersville, PA 18704

Telephone
1.866.296.1100

570-262-1011

Fax
570.288.9999

Email
Parts Inquiry: Info@planet-miata.com

Might not be close, but im sure they buy every wreck possible in the NE, to supply. Ive had good relations with them. SHipping is a little rough, but mabye you can go pick it up.

Goodluck

TheMcCoy14

iTrader: (1)

Thanks guys. Much appreciated.

browning

iTrader: (16)

hey im in northern ark about two hours from you and have a good 1.8 with 47k miles on it has a set adjustable cam gears other than that bone stock for $650 and for $50 ill drive it to your house

TheMcCoy14

iTrader: (1)

that is super interesting. My only hesitation is that I would need to buy a conversion kit and I am turbo'd and there isn't a manifold for the 1.8 that uses my turbo. If I just end up doing the gasket and am still looking for a motor I will definitely look you up. Thank you.

TheMcCoy14

iTrader: (1)

what year is the motor from?

browning

iTrader: (16)

1997

miatamania

iTrader: (9)

I have a spare 1.6 that came from my 90 a year or so ago. ~130k miles, you will need to transfer your oil pan as this was tapped for an oil drain. Motor had good compression when pulled, no leak down numbers though. With the mileage it probably wouldn't be a bad idea to check the valves and valve seals if you are just going to swap this one in and not build it.

$300 for a full long block oil pan to valve cover, no accessories. Should be about $100 to ship on a pallet.

TheMcCoy14

iTrader: (1)

Just ordered a gasket set and water pump/timing belt kit. If I pull the head off and the motor's toast I will get ahold of you, browning, for that motor. Thanks everyone for their input and advice.

browning

iTrader: (16)

just let me know

TheMcCoy14

iTrader: (1)

Can I take off the head with intake manifold still attached? That would really speed things up.