First try Adaptronic on NB 2000
#1
Junior Member
Thread Starter
Join Date: May 2008
Location: Ft Walton Beach, FL
Posts: 46
Total Cats: 0
First try Adaptronic on NB 2000
Guys, this weekend I will be trying My Adaptronics . This time I have an LC-1 hooked to the ECU and still running stock injectors and normal aspiration. Last time the only thing I did was selecting NB engine and adaptroic 3 bar sensor on the menus and used a map provided by Travis for stock injectors with 3bar MAP sensor. The car started but very rough with like wrong timing and did not idled at all. Am I missing something obvious? Are there more steps that I am not aware of? I triple checked all conections and all match Stein's installation thread. Since last time Ive also been reading Electronic Fuel Injection by Ben Strader and now I can make sense of some concepts. Any tips, hints recomendations and advice will be greatly appreciated. I hope to at least achieve a stable idle this weekend.
Thank you
Thank you
#7
Junior Member
Thread Starter
Join Date: May 2008
Location: Ft Walton Beach, FL
Posts: 46
Total Cats: 0
Great results with my installation, I am going to do a little tuning this weekend and try a couple of maps, but the car is running flawlesly and I am learning something new about Adaptronics every time I play with it. I am very pleased with it. If you have the money and you are trying to decide between MS and Adaptronics its hands down!! GO Adaptronics!!! You wont regret it!!!
#10
Go to the .:AdapTronic:. and download the FREE software ( PC Interrogation Software (WARI V1.11)) for the ecu and look at the features. once you download the file, open click on "load from file" then in the new window click on "cancel" then look around. It's all good.
Ted
Ted
#14
Slowest Progress Ever
iTrader: (26)
Join Date: Oct 2007
Location: The coal ridden hills of Pennsylvania
Posts: 6,025
Total Cats: 304
I was sitting back and waiting for the grammar police to show up. Took long enough, but it looks like you got them Duke boys, Cleatus. Now cuff em and stuff em!
#15
Junior Member
Thread Starter
Join Date: May 2008
Location: Ft Walton Beach, FL
Posts: 46
Total Cats: 0
To clear this issue of grammar, cause i know it will show again! I speak 3 languages but English is not my native language, I try my best but errors will be frequent. So everyone relax... Like I said Ill try my best...
thank you
thank you
#18
2 Props,3 Dildos,& 1 Cat
iTrader: (8)
Join Date: Jun 2005
Location: Fake Virginia
Posts: 19,338
Total Cats: 573
yeah yeah you're not a native speaker and I'm the ******* grammar police.
but did you notice the name is sitting right there at the top of the page? Notice it has no S. Dont be lazy and make excuses for something that obvious.
but did you notice the name is sitting right there at the top of the page? Notice it has no S. Dont be lazy and make excuses for something that obvious.
#19
Junior Member
Thread Starter
Join Date: May 2008
Location: Ft Walton Beach, FL
Posts: 46
Total Cats: 0
This doesnt help any forums
thank you