deezums

iTrader: (3)

The lizard wants you to move your idle to redline. Maybe that's the break in procedure?

aidandj

iTrader: (5)

Wut.

deezums

iTrader: (3)

terrible joke

aidandj

iTrader: (5)

You look at my pictures too closely

Guardiola

iTrader: (1)

I'm beginning to appreciate how easy your "build thread" is derailed into nonsense.

aidandj

iTrader: (5)

I lold.

I should ask a mod to copy all my build posts into a new thread, wonder how long it would be.

Itty

That would be cool, there would be like 4 pages of some really useful stuff. I doubt any mods would be willing to do that unless you rubbed them in all the right places.

aidandj

iTrader: (5)

Ok I call BS. I would have at least like 6 pages.

Guise, temp mod me plz

shuiend

iTrader: (24)

No, all of us mods are far to lazy to go back and do that.

patsmx5

iTrader: (16)

You can just do it yourself if you really wanted to. Copy a post from one thread, past it into a new thread, click post.

aidandj

iTrader: (5)

I didn't actually expect you to.

aidandj

iTrader: (5)

I know I can manually but i dont have the effort to do that. If anything I would write some sort of script that parsed everything, and then only copied the posts that were from me.

But mods can copy whole posts, and maybe even batch copy, Idk.

Not enough cares.

Girz0r

iTrader: (1)

Create a new official build thread and keep this one as the sub-build aidan & community discussion panel of new official build thread topics for official posts only in new official build thread, officially.

aidandj

iTrader: (5)

Too much work.

aidandj

iTrader: (5)

Ok so I might have figured out my dying issue, but not sure exactly what setting to change.

Whats happening is holding constant throttle, low load it enters into closed loop idle, and tries to drag my idle down. Then when I push in the clutch my rpms drop like a rock (because my idle valve is barely open).

I'm guessing the culprit is PID disable rpmdot, or RPMdot Threshold. What say you guys. (Paging @deezums and @18psi)

aidandj

iTrader: (5)

18psi

iTrader: (76)

PID delay sometimes causes that. raise it. (thought yours is already at 3 which should be fine)

aidandj

iTrader: (5)

Yep, I've read that thread. I'll try it, but if you see in the log it will sit in closed loop idle for a long time with my foot just barely on the gas.

deezums

iTrader: (3)

I already posted in your other thread, but can you set PID disable rpmdot lower? When the RPMs drop smoothly like that the rpm drop might not hit 200rpm/sec change so it won't turn CL off.

I can't go lower than 200 on mine according to tunerstudio, which is ******* stupid. If my RPM changes more than 50RPM in a second, I want CL off...

aidandj

iTrader: (5)

Look at the log. I hit -1440 rpmdot and it still stayed in closed loop.