Aidan's loose oily bunghole actually runs a track lap
#7605
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Yes. The zeros are confusing.
95 block is still in the car. VVT blocks are still assembled. I need to clean the garage before I take anything important apart.
95 block is still in the car. VVT blocks are still assembled. I need to clean the garage before I take anything important apart.
#7613
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
I've been toying with the idea of a getrag conversion down the road. After selling a torsen its surprisingly cheap. And the getrag diffs are just dirt cheap. Joined a couple local groups to try and snag one for super cheap, but the going rate is like $300 or something in the junkyard. Found one in NC for $150 the other day.
Axles would be the expensive part. Isn't too hard to just go get a driveshaft shortened.
3.73 would be nice.
Wow, the 3.42's are everywhere. I just found 3 within 100 miles for less than $200.
#7615
SADFab Destructive Testing Engineer
Thread Starter
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Deep Dive: General Motors' G80 Locking Rear Differential | truck News @ Top Speed
G80 is the order code. I'm reading more. Thought i might have seen that it was a torsen type at one point
#7616
Looks like they are clutch-type and can indeed be had for cheap
08 14 Cadillac cts Rear Differential Carrier Assembly 3 42 Ratio LSD 122K | eBay - $225 shipped
08 14 Cadillac cts Rear Differential Carrier Assembly 3 42 Ratio LSD 122K | eBay - $225 shipped